System Identification Methods for Fault Detection and Diagnosis
Faults refer to any unexpected changes or modifications of existing structures resulting from extreme loads or other abnormal loading and environmental conditions. Such faults may effect...
Reliability of Control Systems of Building Structures by Active Tendons
In this paper, a numerical assessment on the reliability of a control system of building structures by active cables is performed. Some control experiments on a 23-story shear-wall building...
Safety Evaluation of a Tall Building
This paper uses the extended Kalman filter to perform the system identification of a tall building with the aid of recorded accelerograms obtained from strong-motion seismographs. The...
Effect of Microporosity on Notched Specimen Fatigue Life
The present work examines notched fatigue performance of aluminum alloy 7050-T7451 thick plate containing microporosity. Open hole fatigue specimens from low microporosity and high microporosity...
Fatigue Reliability of Components Containing Microstructural Flaws
A probabilistic crack growth model is presented in which the different stages of crack growth including the small crack regime are taken into account. The microstructural parameter determining...
Probabilistic Analysis of the Ghonem and Dore Data
A two-state Markov process model for fatigue crack growth is utilized with experimental fatigue crack growth data reported by H. Ghonem and S. Dore to study the effect of stress ratio...
Diffusion Models of Fatigue Crack Growth with Sequence Effects Due to Stationary Random Loads
A new fatigue crack growth model that includes load sequence effects is formulated. This model includes a load history dependent parameter, the reset stress, which reflects the state of...
Analysis of Fatigue Crack Propagation Under Random Loading by Markov Chain
Fatigue crack propagation is simulated in terms of a discrete Markov process considering both the randomness of crack propagation resistance and the randomness of external loading, which...
Statistical Fatigue Properties of Carbon Steels for Machine Structural Use Based on JSMS Database on Fatigue Strength of Metallic Materials
A database on the fatigue strength of metallic materials was compiled by collecting the experimental fatigue data of the last 20 years in Japan on a nationwide scale as a joint project...
Distribution of Variance of Fatigue Lives of Ferrous Metals by the Analysis of Fatigue Strength Database
The purpose of this study is to determine the distribution characteristics of variance of fatigue lives of carbon and alloy steels, especially from the viewpoint of their dependence on...
Statistical Fatigue Crack Propagation of a Superalloy Under a Block Type Spectrum Loading at Elevated Temperature
A lognormal statistical model was developed for the prediction of crack growth damage accumulations of superalloys under a block type spectrum loading at elevated temperature. Both the...
Fatigue Design and Reliability Analysis of CFRP Composites
The statistical fatigue properties of unidirectional (UD) T800/3631 carbon/epoxy composite laminates are investigated in this paper. Fatigue tests were conducted under rotating bending....
Fatigue Reliability of Steel Structures in the Presence of Residual Stresses
An extended model for the assessment of fatigue reliability of steel structures in the presence of residual stresses is developed. The model explicitly includes the uncertainties of the...
Fatigue Reliability and Remaining Fatigue Life of Existing Steel Rail-Road Bridges
This paper presents a fatigue reliability model for the reliability-based evaluation of remaining fatigue life of existing rail-road bridges. It is demonstrated that the simple fatigue...
The Effects of Thermal Variation in Fracture Toughness
Environmental temperature changes produce cyclic and thermal stresses in cylindrical structures. The probability of failure defined as the chance that a crack, growing under the influence...
Fatigue Test Using Multi-Notched Specimen and its Reliability Analysis
This paper presents a fatigue testing method using a multi-notched test specimen for the purpose of estimating the distribution function of fatigue crack initiation life by a small number...
Fatigue Crack Closure Under Random Loading
The goals of the research are to determine fatigue crack growth rates for stationary random amplitude loadings with arbitrary mean stress. Fatigue crack closure theory is applied to justify...
Time Variant Reliability Analysis Considering Corrosive Effects
In this study the influence of corrosion is determined as a function of the stress intensity factor, the frequency and the stress ratio of the loading process. The present study investigates...
Fatigue Reliability of Prestressed Concrete Bridges
Experimental studies indicate that fatigue is a random phenomenon. Therefore, the approach is based on probabilistic methods. The fatigue life of the prestressed concrete girder is estimated...
The Estimation of Allowable Strength Based on Fatigue Reliability of Welded Part and Base Metal of Rail in Korea
In the allowable stress design, the safety of structures have been ensured by safety factor based on static strength. Under dynamic loading condition, the allowable stress based on allowable...
Return to search