Dilatometer Tests for the Design of Grouted Piles in Rock
A case study of drilled and grouted piles in rock, which were analyzed using results of down-hole dilatometer tests is presented. The tests were performed from a jack-up platform in water...
Pressuremeter Tests and Shoring Wall Design
Pressuremeter testing was used as an integral part in the design of the temporary tieback shoring wall for the Columbia Center office building in Seattle, Washington. Pressuremeter testing...
Dilatometer Tests in Sand
The paper presents two applications of the dilatometer test in sands: control of compaction and determination of constrained modulus. Twelve dilatometer tests were carried out before and...
Laboratory and Field Evaluation of Cone Penetrometers
Cone penetrometers from 8 organizations have been studied by performing laboratory tests and field tests. The testing show that pore pressure and temperature zero shift affect significantly...
The DMT - ?hc Method for Piles Driven in Clay
This paper presents a tentative method for evaluating the limiting skin friction f//s for piles driven in clay based on sigma //h'c (horizontal effective stress at the interface...
Site Characterization Using the Cone Penetrometer Test
The Cone Penetrometer Test (CPT) when used in conjunction with a limited soil boring program can provide a more detailed and economical site characterization. This paper addresses how...
Analysis of Liquefaction Potential by Insitu Testing
This paper describes the results of insitu testing performed to assess the liquefaction potential of a sand formation at a site for a proposed large industrial facility in East Central...
In Situ P and S Wave Velocity Measurement
A review of the in situ techniques to measure P and S wave velocities by seismic wave propagation is presented. A relatively new technique, the suspension PS logging method, is described...
In-Place Permeability Measurement of Slurry Trench Cutoff Walls
A suggested procedure for the in-place measurement of slurry trench cutoff wall permeability is presented. The H. Bouwer and Rice method, employing a single observation well and variable-head...
Use of Piezometer Cone Data
The piezometer cone is generally regarded as the most efficient tool for stratigraphic logging of soft soils. A thin pore pressure element (5 mm thick) can sense layers a few centimeters...
The Pressuremeter for Foundations: French Experience
The paper presents historical information on the development of the pressuremeter and its application in the Laboratories Central des Ponts el Chaussees (LCPC). The continuous research...
Slow Rate Sand Filtration Using a Zeolite Surface Amendment
The objective of the study was to obtain detailed information regarding amended filter performance at surface loading rates 2 to 4 times higher than standard flow rates. Experiments were...
Models of Organics Transport Through Soil Columns
A mathematical model is proposed for the transfer of organic solutes in soil. Two cases are considered namely transport of non-adsorptive solutes and transport of adsorptive solutes. Comparative-study...
Modeling the Movement of Volatile Organic Chemicals with Unsaturated Flow
Over the past decade, the rate of groundwater contamination by volatile organic chemicals (VOCs) has increased. Therefore, for both groundwater protection and cleanup, it is necessary...
Modeling Dispersion in Non-Homogenous Formations
A stochastic model of contaminant mixing in non-homogeneous porous media has been developed. The model is three dimensional and relates the contaminant distribution to the probability...
Data from Most Monitoring Wells in Limestone Terranes Are Irrelevant to Pollutant Detection but Reliable Monitoring Can Be Attained: Why and How
The conventional system of using three or more monitoring wells placed down-gradient from a site and one or more background wells placed up-gradient from it is extremely unlikely to detect...
Viscoplastic Fluid Model for Debris Flow Routing
This paper describes how a generalized viscoplastic fluid model, which was developed based on non-Newtonian fluid mechanics, can be successfully applied to routing a debris flow down a...
Engineering Methodology for Delineating Debris Flow Hazards in Los Angeles County
Utilizing historical and field data, elementary geomorphology and simplified hydraulics of debris flows, a mapping strategy has been developed. The delineation procedure includes defining...
Seawater Intrusion in Salinas Valley, California
The rate of intrusion has been estimated to be about 19,000 acre-feet per year. If no action is taken to halt the intrusion, it is projected that in the year 2000 there will be as much...
Flood Risk Below Steep Mountain Slopes
Alluvial fans spread at approximately the critical hydraulic slope below apexes at canyon mouths. Periodic torrents that rage out of the canyons are devastating at the apex and have diminishing...
Return to search