Optimizing Regional Detention Basins for Price Expressway
Stormwater runoff from the drainage area contributing to the Price-Santan Freeway is captured in regional detention basins which require a series of pump stations for evacuation. With...
Fluidization Pipe Hole Spacing
Two-dimensional fluidization experiments are performed on fine (d50 = 0.15 mm) and medium coarse (d50 = 0.45...
Preventing Stilling Basin Abrasion
A 1:10 scale physical hydraulic model of Taylor Draw Dam outlet works was used to develop modifications to prevent back flow intake of rock into the stilling basin. Much of the back flow...
Bridge Scour Vulnerability Assessment
Although the failure of the New York Throughway bridge over Schoharie Creek in 1987 has focused national attention on scour related failures, other failures reinforce the need for implementing...
Evolution of Appropriate Technology
Although appropriate technology has been practiced since the beginning of people on earth, the inventiveness of the 20th century is forcing engineers (and others) to look at the multitude...
Health Benefits From the Use of Appropriate Technologies in Water Supply and Sanitation
Research on selected diseases in developing countries has found significant health impacts from water supply and sanitation interventions. Sanitation, personal and domestic hygiene, and...
Modeling of Wetland Hydrodynamics and Transport in Coastal Louisiana
Modeling of hydraulics and transport of large wetland systems poses critical decisions between resolution of the complex geometry of a wetland and the testing required to meet study goals....
Bridge Scour Research Needs
This paper presents a summary of the Federal Highway Administration (FHWA) priority research emphasis on bridge scour, sedimentation, and stream stability problems. The most persistent...
Management and Institutional Considerations in Selecting Appropriate Technologies in Water Supply and Sanitation
Rural water supply and sanitation systems in developing countries have had an unacceptably high rate of failure or reduced use. Development planners have not sufficiently considered the...
Education, Research and Training for Appropriate Technology
Much has been written about appropriate technology (AT) and how to accomplish it. This paper adds to that literature with specific ideas for education, training and research programs and...
Appropriate Technology in Hydraulic Engineering
Appropriate, and successful, technology transfer is contingent upon the simple dictum: technology transfer is context dependent and context specific. Optimum success in the transfer of...
Issues and Challenges Facing the Effective Delivery of Scientific Visualization
The availability of economical hardware and software products for scientific visualization has stimulated implementation of scientific visualization within high performance computing environments....
Introduction, and Analysis of Survey?Preliminary Report of Task Committee on Recommendations for Standards in Hydraulics
To help formulate its recommendations for future standardization of tasks in hydraulic engineering, the Task Committee conducted a survey of practicing engineers. This survey indicated...
Existing U.S. Standards in Hydraulic Engineering
The Task Committee on Recommendations for Standards in Hydraulics confined itself to topics that are used in hydraulic computations or design. Thus numerous standards related to size,...
Foreign Hydraulic Standards and Guidelines
Standardization in Europe is propelled by the incentive to achieve harmonization of design, testing, inspection and certification methods for an internal market among eighteen European...
Preliminary Recommendations from the Task Committee on Standards in Hydraulics
The Task Committee on Standards in Hydraulics has been given the responsibility of recommending whether or not the American Society of Civil Engineers (ASCE) should formulate standards...
Environmental and Hydraulic Considerations in the Design of a Circulating Water Cooling System
Environmental considerations play an important part in the design of a condenser cooling system. A once-through system may require assessment of a combination of events to determine the...
Set-Down in a Tidal Embayment
A mean water level in tidal bays and estuaries that is higher than the ocean mean water level (set-up) is a fairly common occurrence. Set-down of the mean water level can be shown to be...
Experimental Model Study of Over and Under Baffles
A hydraulic model study of a chlorine mixing channel was conducted at the Hydraulic Research Laboratory of the City of Los Angeles. An arrangement of over-under baffles was used to facilitate...
Classification and Prediction of Buoyant Surface Discharges
Past efforts to predict the dilution and geometric characteristics of buoyant surface flows have relied on integral modelling techniques involving the solution of a series of differential...
Return to search