Strength of Composite Beams under Seismic Loading
Effective width of a concrete slab of a composite beam is specified in various specifications, but their theoretical backgrounds are obscure. Originally, they must have been specified...
Load-Carrying Capacity and Remaining Life of First-Built Composite Girder Bridge in Japan
Kanzaki Bridge, Osaka, Japan, was the first steel-concrete composite bridge built in 1953 to carry the Osaka Prefectural Road over Kanzaki River. The bridge was removed in 1978 after 25...
Dynamic-Fatigue Response of Continuous Composite Bridges
The dynamic response of continuous composite bridges and the influence of fatigue loading at resonance frequency on the structural response are investigated. It is shown that cracking...
The Eurocodes and Shrinkage in Composite Beams
The two parts of this paper relate to different aspects of design procedures for composite structures of steel and concrete. First, recent developments in the coordination of the eight...
Strength of Biaxially Loaded SRC Columns
The paper presents the results of an experimental study on the elasto-plastic behavior of 'Steel reinforced concrete (SRC)' columns subjected to biaxially eccentric...
Beam-to-Column Connection of a Composite Structure
Composite structures can exhibit excellent performance against seismic force, and fire safety as well. However, the traditional steel reinforced concrete (SRC) system or concrete encased...
Beam to Column Stress Transfer in Composite Structures
To clarify the mechanism of the stress transfer from the steel beam to the composite column through the beam-column joint, eight exterior beam column assemblies were tested under reversed...
Seismic Strengthening of Existing RC Buildings
Seismic strengthening of existing reinforced concrete (RC) frame buildings by the use of steel braces or panels was studied experimentally. A special joint between steel elements and the...
Timber Bridge Decks
The portion of the nation's 500,000 bridge decks that are made of timber has been declining for years, as the old timber ones on secondary road bridges are rebuilt, in most...
Critical Load Program
The elastic critical load of a structural frame is a fundamental parameter in assessing its stability. It is an upper bound to the failure load of the frame, in the same way that the Euler...
An Economic and Financial Planning Model
A comprehensive computer model for generation planning has been developed and applied to several large-scale power sector master plans. A unique feature of this model is the concurrent...
Implementation of a Micro-CADD System
Computer-aided-design-and-drafting (CADD) systems utilize computer technology to aid the engineer in his work. CADD systems are designed to process graphics with speed and accuracy to...
Application of Phosphorus Models to New Mexico Reservoirs
Many empirical, mass-balance phosphorus models have been developed and tested on northern, temperature lakes and previously published. Fourteen of those published models were tested on...
Microcomputer Application in Predicting Upland Erosion
An erosion-deposition model, originally developed for a mainframe computer, was adapted for an Apple IIe. With minimal adjustment it can also be used on other personal microcomputers....
Enhanced Mobility of Polynuclear Aromatic Compounds in Soil Systems
The objective of this study was to determine adsorption isotherms for polynuclear aromatic (PNA) compounds in methanol and a mixture of 50 percent methanol 50 percent water. The adsorption...
A Modified RBC Design: Performance Evaluation
An RBC (rotating biological contactor) system was designed using Pall rings type 40, and tested under high organic surface conditions. Influent soluble BOD averaged at 55 mg/l, equivalent...
A New Approach to Activated Sludge Plant Design
Activated sludge plants are designed on the basis of stationary tests at laboratory scale for constant organic loads and constant input flows. From these tests the kinetic parameters are...
Land Treatment of API Separator Sludge
An extensive research project was undertaken to establish design and operational guidelines for treatment of oily sludge using land treatment systems. Forty-five test plots were established...
Impact of Dynamic Loading on Bio-Phosphorus Removal
The ability of bench-scale activated sludge biological phosphorus removal systems to produce effluents with consistently low phosphorus concentrations was influenced by influent TOC/COD...
Structural Safety Studies
Structural engineers are most concerned with the safety aspect of structures. The primary objective of structural engineers is to produce structures which are satisfactory in meeting certain...
Return to search