Harbour Development in Southern Part of Thailand
Fishery ports located along the river mouthes in southern part of Thailand were developed by improving their navigation channel to provide acessibility of fishery boats to travel all year....
Numerical Modeling of Proposed Kawaihae Harbor, HI
The Kawaihae shallow-draft harbor site is located on the northwest coast of the island of Hawaii, HI. An entrance channel, turning basin, and breakwater currently exist at the harbor site....
Inner Harbor Wave Conditions due to Breakwater Overtopping
The results of this study have important application to the design of small boat marinas protected from incident waves by breakwaters that may be overtopped during extreme wave events....
Wave Barriers: An Environmentally Benign Alternative
This paper describes the history and development of the environmental wave barrier and the current planning and design being undertaken for a major expansion of the small boat harbor at...
Design, Construction, and Performance of a Baffled Breakwater
The Spud Point Marina breakwater is located within Bodega Harbor, a protected embayment on the northern California coast. Waves are attenuated by baffle panels hung between support piles....
Design and Construction of Shinnecock Inlet, New York
Shinnecock Inlet is the easternmost of six coastal inlet which bracket the barrier island on the south shore of Long Island, New York. Through recent history, Shinnecock Inlet has exhibited...
Scour Hole Development and Stabilization at Shinnecock and Moriches Inlets, New York
A scour hole developed inside the Shinnecock Inlet channel near the tip of the west jetty. Over the years, this hole deepened to about 70 ft below the mean low water level with the average...
South Jetty Scour Hole Stabilization, Ocean City, Maryland
Formation of a scour hole along the inlet side of the South Jetty at Ocean City occurred after jetty construction as a result of ebb tidal flow in the inlet. Analysis of historical bathymetry...
Alternative Study for the Breakwater and Fishing Pier Rehabilitation at Playland Park, Rye, New York
An alternative study was conducted to determine that existing condition of a deteriorated timber pier and a rubblemound breakwater, and to develop alternative rehabilitation plans leading...
Case Study of an Offshore Horizontal Boring
A pipeline system was needed to transport natural gas from a discovery in Mobile Block 823 to Mobil's existing system inside Mobile Bay. Sand Island, a small barrier island off Dauphin...
Dutch Experience on Design of Dikes and Revetments
The increased demand for reliable design methods for protecting structures has resulted in The Netherlands in preparing a set of design guidelines for design of dikes and revetments. The...
Development of Detached Breakwater Design Criteria Using a Shoreline Response Model
An evaluation of beach response to detached breakwaters was conducted using the numerical shoreline response model GENESIS. Functional design parameters such as structure length, gap distance,...
Application of a Dolos Structural Design Procedure
Dolos concrete armor units are widely used to protect coastal structures. New developments in armor unit strength design permit the armor unit designer to optimize the dolos parameters...
Concrete for Sealing Voids in Rubble Structures
Permeability of rubble-mound breakwaters and jetties to sand transport and wave transmission results in increased costs for dredging and navigation. Guidance is provided for economically...
A Design Manual for Coastal Fluidization Systems
This paper summarizes a recently completed design manual on fluidization systems to manage sand in the coastal environment for sand bypassing at inlets and harbor mouths and for creating...
Application of Extremely Low Altitude Photogrammetry for Monitoring Coastal Structures
Extremely low altitude mapping photography exposed from a helicopter is showing considerable promise in providing another method of extending the many benefits of photogrammetric data...
Value Engineering in Coastal Design
A formal procedure of value engineering can be applied to coastal design to refine a design and reduce the construction costs. Despite the relatively simple technology and materials used...
Environmental Effects of Beaufort Sea Causeways
Two gravel-fill causeways have been constructed into the shallow nearshore Beaufort sea on the north coast of Alaska for the development of petroleum reservoirs. These long (4-8 km) structures...
Sandbridge Virginia Oceanfront Seawall Arbitration Hearing: Some Lessons Learned for Coastal Engineers
A group of beach property homeowners claimed that their new oceanfront seawall was defective in design. A beefed-up design cost about $1.3 million more and they sought this amount from...
Retrofitting a Landmark
A decade after it was abandoned, a famous sixty year old tire factory has been rehabilitated as part of a $118 million adaptive mixed-reuse commercial-office mall known as the Citadel....
Return to search