Experimental and Theoretical Dynamic Compliances of Foundations
An experimental study of the dynamic behavior of surface foundations on granular soils by centrifuge modeling is presented. The test method allows a direct measurement of the complex-valued...
Retrospect and Prospect: Micromechanics
In the mechanics community the term micromechanics is often used to identify scientific efforts in which certain overall macroscopic material response and failure modes are characterized...
Wave Propagation in Solids
The last fifty years have seen the development of a large number of application of the theory of wave propagation in solids to problems of interest to civil engineers. Most notable have...
Postbuckling Behavior of Stiffened Composite Shell Panels
The paper summarizes the current status of an ongoing study on the postbuckling behavior of thick and moderately thick composite stiffened shells. Axially compressed moderately thick panels...
Dynamic Stability of Composite-Material Circular Cylindrical Shells with Orthogonal Stiffeners
The governing equations are formulated for general (axisymmetric or unsymmetric) vibrations of thin circular cylindrical shells of composite material and reinforced with axial (stringer)...
Bifurcations and Chaos in Structural Control
We study a harmonically forced oscillator with nonlinear soft spring subjected to a linear feedback control with time delay. This system can be written as a three dimensional dynamical...
Regularization Methods for Identification of Structural Damage
Generally, various non-unique solutions may be obtained from ill-conditioned equations. Several methods are available to obtain a unique (minimum energy) solution to a modified and thus...
Updating Dynamic Models and Their Associated Uncertainties for Structural Systems
The problem of updating a structural model and its associated uncertainties using dynamic test data is addressed, considering uncertainties which arise from measurement noise, modeling...
Applications of Viscoelastic Damper to Jointed Structures for Seismic Mitigation
Some structures, such as dams, are built with contraction joints that might carry some small tensile stresses. Such joints are expected to open and close during an earthquake. That will...
Anatomy of the Loma Prieta Earthquake Records of Two Steel Buildings Using MIMO System Identification
The Loma Prieta strong-motion records of a 4-story and a 47-story steel building are analyzed using system identification. A time variation study from the 4-story building records reveals...
Effect of Active Control on Closely Spaced Natural Frequencies
Current problems in structural control involve structures with closely spaced natural frequencies (M.J. Balas, 1983). The purpose of this paper is to show how control affects a structure...
Mathematical Characterization of Fabric and Its Use in Mechanics of Geomaterials
Increased evidence of the influence of their discrete nature on the observed behavior of geomaterials has prompted a number of investigators to look at these materials at the microstructural...
The Microstructure of Hardened Cement Paste and Concrete
Concrete is a composite material created from a mixture of a binder (hardened portland cement paste) and a filler (fine and coarse aggregates). Like any other composite material the physical...
Micromechanics Based Design for Pseudo Strain-Hardening in Cementitious Composites
Micromechanical model constructed on the basis of fracture mechanics and fiber bridging provides a means of selection of fiber, matrix and interface property combinations for which short...
Effect of Micro-parameters on the Macroscopic Behaviour of Ductile Fiber Reinforced Brittle Matrix Composites
In this paper, the modelling of crack bridging stress vs crack opening (?-?) relation of ductile fiber brittle matrix composite in terms of its microscopic parameters is described. Parametric...
Distributed Failure Analysis, Fallacies and Remedies
In the past, two distinctly different approaches - smeared and discrete failure descriptions have been utilised to capture failure mechanisms in solids and structures. These two approaches...
Failure Analysis of Masonry Structures
The use of smeared-crack and interface elements for the analysis of masonry structures is investigated. While a variety of structural problems can be solved with a combination of both...
Frequency Response of Disordered Periodic Structures
A computational procedure is given for calculating the frequency response of disordered periodic structures based on wave propagation theory. An ideal periodic structure is composed of...
Random Response of Multicrystalline Structures
An approach to the probabilistic modelling and analysis of multicrystalline microfabricated beams is presented with application to micro-electro-mechanical systems (MEMS). Random, textured...
Full Scale Application of Active Bracing Systems
A full scale active bracing system has been installed in a structure in Tokyo, Japan. The practical problems associated with the implementation of this system, and the corresponding solutions...
Return to search