Structural Design of the Defense Waste Processing Facility
The Defense Waste Processing Facility (DWPF) is designed to process radioactive defense waste sludge and the radioactive nuclides, cesium and stronium, from the salt solution. These radioactive...
A Generic Design for On-Site Low Level Radioactive Waste Storage
This paper describes a generic design for an on-site low level radioactive waste storage facility. The generic design encompases the development of design criteria including an envelope...
Building Arrangement and Site Layout Design Guides for On Site Low Level Radioactive Waste Storage Facilities
This paper will discuss a typical storage facility and address the design considerations and operational aspects that are generally overlooked when designing and siting a low level radioactive...
Nonlinear Analytical Models for Interfacial Plug Stresses in Creeping Salt Formation
Analytical and numerical simulation models are presented which predict the nonlinear time dependent behavior of an expanding plug in a creeping environment heavily dependent on the storage...
A Demonstration Expert System to Aid in Assessing Groundwater Contaminating Potential by Organic Chemicals
An expert systems approach to evaluating mobility and degradation of organics in soil systems is compared to conventional programming techniques. An expert system has been developed in...
Toxicology and Chemistry of Metals in Urban Runoff
Water quality characteristics such as inorganic and organic ligands, pH, and water hardness will reduce the toxicity of metals through different chemical or physiological mechanisms. Increases...
Lognormality of Point and Non-Point Source Pollutant Concentrations
This paper presents a series of probability plots of water quality data from a variety of discharge sources. It is intended to provide a visual display of the appropriateness of characterizing...
Bridging the Joints in Bridges
Most bridges are designed with gaps in them. The cracks allow bridges to expand and contract as the temperature changes. But water can enter these gaps and foul bearings and structural...
Constructing a Better Environment
The civil engineer is traditionally designated the jobsite environmental engineer during construction, and is responsible for managing environmental protection and monitoring. Jobsite...
New Runways Take Off
The two mile long runway 9-27, now being constructed at Houston Intercontinental Airport, was built for about 30% ($7 million) less than if designed conventionally. Rather than concrete...
Nuclear Waste Handling and Storage
These papers examine a number of topics related to handling and storage of nuclear wastes and spent fuel as well as some topics related to transportation and long term disposal of nuclear...
Housing and Hazardous Waste Contamination
Problems and Remedies
When hazardous waste sites are discovered in close proximity to residential areas, scientists and engineers are often faced with conducting complex studies involving many government agencies...
James B. Francis and the Northern Canal
Lowell became America's first great industrial city because of the power of the Pawtucket Falls and the efforts of an amazing group of engineers, industrialists, and workers....
A Digester Gas Cogeneration Plant at EBMUD
Final testing and start-up of a 4. 3 MW digester gas cogeneration plant has been completed and full-time operation begun at the EBMUD Wastewater Treatment Plant in Oakland, California....
Managing Public Works: How the Best Do It
Management methods of what are considered the best public works organizations are reviewed. Examples of personnel management in some of these organizations include: Fostering the professional...
Hazardous Waste: Closing the Insurance Gap
Insurers are withdrawing from the hazardous waste field because of large claims and increased risks. Therefore, cleanup contractors are being forced to look for alternative ways to protect...
Structural Considerations for a Radwaste Facility
The structural engineer needs to consider several criteria when designing a radioactive-waste processing facility in order to properly balance the requirements of safety and economy. This...
Civil Engineering Challenge with Nuclear Waste
The planning, design and construction of the ground surface facilities for a nuclear waste repository involves civil engineering in many ways. The transportation of heavy, metal shielded...
Innovtive Designs for Low-Level Nuclear Waste Disposal Trenches
Shallow land burial of low-level nuclear wastes presents many problems that are within the scope of civil engineering analysis and design. This paper presents the results of a U. S. Nuclear...
A Model for Nuclear Waste Shipping and Storage
A management option for spent fuel assemblies from nuclear power plants is storage in away-from-reactor (AFR) storage facilities. The purpose of this paper is to preseent a new mathematical...
Return to search