General Continuum Models for Discrete Structures
New knowledge is presented about the structural behavior of a variety of large repetitive lattice configurations of the type appropriate for utilization in cosmic space. Focus is placed...
Liquefaction Flow Failure of Silty Sand by Torsional Cyclic Tests
The use of undrained strain-controlled cyclic torsional loading of anisotropically consolidated triaxial specimens (CyT-CAU tests), is proposed for evaluating liquefaction flow failure...
Torsional Simple Shear Apparatus for Drained and Undrained Cyclic Testing
Since a cyclic triaxial compression apparatus was first used to study liquefaction of saturated sandy soil, many different types of cyclic shear devices have been used to investigate drained...
Multi-Directional Irregular Loading Tests on Sand
In order to clarify the effects of irregular and multi-directional nature of load application on soil deposits during earthquakes, multiple series of laboratory tests were conducted on...
Cyclic and Monotonic Undrained Response of Saturated Sands
A unified picture of the undrained monotonic and cyclic loading response of saturated sands is presented. A wide range of initial states of sand are covered in order to consider a full...
Shear Moduli Measurements under True Triaxial Stresses
The effect of state of stress on the shear wave velocity and shear modulus of a dry sand was examined. Testing was performed in a large-scale triaxial device in which cubic soil samples...
Centrifuge Model Testing with Dynamic and Cyclic Loads
This paper examines the use of small-scale tests on centrifuges to study a wide range of problems in soil dynamics - including machine foundations, structures and explosion effects. The...
The Uplift Capacity of Helix Anchors in Sand
Results of field and laboratory investigations of the uplift capacity of helix anchors in sand are presented. Equipment and instrumentation were used to measure uplift load, anchor deflection...
Uplift Capacity of Shallow Offshore Foundations
Soil failure under upward loading is investigated by experimental laboratory tests. The problem of uplift capacity is considered in terms of effective stresses in soil skeleton and pore...
Resistance of Shallow Inclined Anchors in Clay
Some recent laboratory model test results for the ultimate pullout resistance of a square anchor inclined at angles of 0, 20, 50, 75, and 90 degrees with respect to the horizontal have...
Forecasting the Demand for Electricity: An Examination of Alternative Approaches
This paper examines several approaches to forecasting national-level electricity demand. The various approaches are briefly examined, and the strengths and weaknesses of each are discussed....
The Role of Demand Forecasts in Pacific Northwest Power Planning
This paper has two primary objectives: to acquaint a general audience with the basic approaches used to forecast the demand for electricity, and to discuss the role of demand forecasts...
The Impact of Demand-Side Management on Load Growth: Some Tentative Results
Demand-Side Management (DSM) programs including load management, conservation and strategic load growth are being implemented by a very large number of utilities for the mutual benefit...
New Cables for Old
In an eingineering first, the main suspension cables will be replaced on New York City's Williamsburg Bridge without closing it to traffic at any time. According to the design...
Performance of Cogoti Dam Under Seismic Loading
At the time of its completion in 1938, the 280 ft (85 m) high Cogoti concrete face rockfill dam was exceeded in height by only one other dam of its type in the world, Salt Springs Dam....
Kotmale Dam and Observations on CFRD
A concrete faced rockfill dam was the type selected for the 300 ft (90 m) dam at Kotmale in Sri Lanka for reasons of economy and speed in construction. Standard design concepts were tailored...
Foundation Design Considerations for Detroit DPM
The design loadings for support of the elevated guideway of the Detroit Downtown People Mover (DPM) consist of high vertical as well as horizontal loads. In order to simplify foundation...
Advances in High Strength Concrete,
The technology for producing field placeable concrete with a 28 day compressive strength of 10,000 psi has been available for many years. With the recent use of microsilica as an additive...
Seismic Design-Qualification of Non-Safety Related Items in Safety Related Envelope
This presentation pertains to Seismic Design-Qualification for those portions of structures, systems, or components in a Nuclear Plant whose continued function is not required but whose...
Effects of Streambed Processes on Interaction Between Surface and Groundwater
In open channel systems, the phenomena commonly referred to as 'clogging' is caused by settling of sediment and straining of suspended material as water moves...
Return to search