Validation of the SEADYN90 Cable Simulation Model Using a Three-Dimensional Cable Deployment Data Set
This paper presents data from a full-scale, three-dimensional cable payout test and the corresponding numerical simulations using the SEADYN90 computer model. The experiment, which was...
Design of Tension Leg Platforms: A Knowledge Based Approach
Tension leg platforms (TLPs) are floating compliant platforms designed for deep water offshore hydrocarbon production. Only a few TLPs have actually been built, but others are currently...
Current Blockage Effects on Model-Scale Offshore Platform
This paper presents analysis results of model tests on a 1:47 scale model of an offshore jacket structure under wave-plus-tow (representing wave-plus-current) conditions. The analysis...
Broadside Current Forces on Moored Ships
A method of estimating the static lateral current force on ships in deep and finite depth water is presented for the case of the current broadside to the ship. The method is based on recent...
The SIMBAT Software Package for Stochastic Interpolation of Ocean Wave Kinematics as an Aid in the Engineering Design of Large Floating Structures
Geostatistical techniques of nonconditional and conditional simulation are used in a new public domain computer software package, named SIMBAT, to stochastically interpolate ocean wave...
Three-Dimensional Circulation Modeling of the Coastal and Ocean Environments
Incursion of the loop current, a meandering feature of Gulf of Mexico large-scale circulation, may produce large hydrodynamic forces on the offshore structures. The present study is to...
A New Concrete Armor Unit for Breakwaters: The Beta Block
The aim of this paper, is to present a new artificial block for the protection of breakwaters. This armor unit, named BETA, has been designed and tested in the Coasts and Harbors Studies...
Hydraulic Design of Offshore Breakwater in Sergipe, Brazil
A Petrobras (Petroleo Brasileiro S.A.) marine terminal was recently constructed in Sergipe, Brazil (Figure 1). The offshore breakwater was initially designed in a conventional way, but...
Stability of Accropode(R) and Comparison with Parallelepipedic Block
This paper describes the tests which were performed on physical models with irregular waves, to determine the hydraulic stability of the Accropode(R)...
Mobile-Bed Physical Model Tests for the 1992 Olympic Harbour
The undistorted physical model is described which allowed the measurement of the wave induced velocity field along the main breakwater, and also in Somorrostro Beach (Barcelona). The current...
Piles Under Dynamic Loads
This proceedings,
Measured to the Max
Engineers looking to model the behavior of a structure under seismic conditions often ignore the best source of data available: the building itself. Full-scale measurements of vibrations...
MUT1D: User-Friendly One-Dimensional Thermal Model
MUT1D is a microcomputer-based heat conduction model which uses implicit finite difference techniques to determine the thermal regime and track the movement of the phase change front in...
Sludge Dewatering in Freezing Beds
This paper summarizes the results of laboratory and pilot scale studies on the development of the sludge freezing bed. Laboratory studies indicated that a freezing bed could dewater up...
Computer Predictions of Thaw Beneath Gravel Embankments on Warm Permafrost
A computer model was used to simulate the freeze-thaw effects of gravel embankments on warm permafrost typical of south-central Alaska using a one-dimensional finite-difference code, FREZ1D....
Impact of Cold Weather on Building Construction Scheduling
Weather impact on a building construction schedule is often significant in cold regions. Most deterministic scheduling methods are unable to directly account for the effects of weather...
Ice Jam Configuration: Second Generation Model
An early model of ice jam configuration in wide, prismatic channels is generalized for applications to natural streams. Test runs are carried out to illustrate model performance and study...
Analysis of Waterbody Surface Heat Exchange
The Edinger-Duttweiler-Geyer (EDG) approach for estimating heat exchange at a water surface was examined and its applicability to ice-covered waterbodies determined. The EDG linearized...
A Conceptual Model for Vertical Frazil Distribution in Turbulent Flows
A conceptual model is presented for the evolution of frazil over depth in a turbulent flow. The net upward migration due to buoyancy of the frazil is opposed by intermittent mixing induced...
A Two-Dimensional Surface Drift Model for River Ice
A two-dimensional surface drift model for river ice with low ice discharge conditions is presented. The model is applied to the Grass Island Pool area of the Niagara River and compared...
Return to search