Neural Network Modeling of the Mechanical Behavior of Sand
Given a set of triaxial test data, an artificial neural network (ANN) has been trained to model the mechanical behavior of a medium-to-fine sand. Once trained, the ANN was tested by simulating...

Stochastic Modeling of Fatigue Crack Growth with Retardation
This paper develops a new methodology for modeling fatigue crack growth accounting for both material inhomogeneity and the random nature of the loading process by modeling the crack growth...

Joint Network Modeling and Scale Effects in Rock
Joint networks play a vital role in the mechanical and hydraulic behavior of rock masses. A realistic representation of joint geometry in rock masses and correct understanding of the mechanical...

The Flow in the Front Stagnation Region of a Square Plate with a Small Disturbing Wire in its Upstream
The flow in the front stagnation region of a square plate was investigated experimentally in a water channel. A small wire was placed in the upstream of the square plate to create a small...

Vortex Suppression in Wet-Pit Pump Intakes
Two distinct examples to suppress both air-entraining and boundary-attached subsurface vortices in large vertical pump intakes are presented that were developed by means of hydraulic model...

Automated Identification of Compression-Induced Cracking in Cement Paste
The development of image analysis techniques to identify cracks using scanning electron microscope images of hydrated cement paste is described. Cracks are identified based on both the...

Complementary Potentials of Finite Elasticity
The principles of virtual displacements and forces are embodied in a functional P. The complementary potential Pc is defined by the equation; Pc...

Mechanics of Growing Deformable Solids: A Review
An attempt is undertaken to summarize the contemporary knowledge in mechanics of deformable solids of accruing mass. A general mathematical model of an abstract growing deformable solid...

Functional Analysis in Continuum and Structural Mechanics
Following brief historical remarks, the equations of the hypercircle and hypersphere of Prager and Synge and associated formulae for pointwise bounds are derived. The application of the...

Estimating Damage and its Influence on Fracture Toughness
To estimate damage in a quantitative manner, a technique used whereby six values of linear strain are measured on a material element as a function of hydrostatic pressure. The high precision...

Probabilistic Assessment of Composite Structures
Formal procedures are described which are used to computationally simulate the probabilistic behavior of composite structures. The computational simulation starts with the uncertainties...

Sensitivity of Lifeline Response to Models for the Spatial Incoherence of the Seismic Ground Motions
The sensitivity of the response of above-ground and buried lifelines to different models describing the spatial variability of the seismic ground motions is examined. It is shown that...

First Order Importance Sampling Method and its Variance Reduction
This paper proposes an Importance Sampling method for structural system reliability problems with linearized modal failure surfaces. It has the advantage of locating all samples in the...

Nonstationary Response Characteristics of Linear MDOF Systems
A new approximate methodology for nonstationary random vibration analysis of multi-degree-of-freedom linear systems is developed. Simple analytical expressions for the covariance response...

Interaction Between Soil and a Rigid Foundation in a Layered Medium: A New Analytical Approach
This paper is concerned with derivation of the impedance matrix for the problem of interaction between soil and an embedded rigid foundation in a layered medium. As an approximation, the...

Flexible Plates for Control of Stress Distribution
Use of a flexible plate in minimization of soil reaction concentrations at the edge was analyzed. The analysis utilizes a solution for vertical vibrations of the circular flexible plate...

Wave Propagation in a Nonlocal Strain-Softening Continuum
The problem of wave propagation in a nonlocal strain softening solid is first discussed analytically. It is demonstrated that 'loading' waves can still propagate in the strain softening...

On the Role of Dispersive Waves in Strain-Softening Media
Wave propagation in strain-softening continua is investigated numerically and analytically. It is argued that localisation which typically acts as a precursor of failure, can only be described...

Highly Accurate Adaptive hp-Methods for Linear Elastostatics
A new class of highly accurate, self-adaptive computational methods for two- and three-dimensional elastostatics problems is presented which can deliver solutions to general boundary-value...

Retrospect and Prospect: Micromechanics
In the mechanics community the term micromechanics is often used to identify scientific efforts in which certain overall macroscopic material response and failure modes are characterized...

 

 

 

 

Return to search