ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Boundary Shear in the Vicinity of River Banks
Some experimental data are presented concerning the distribution of boundary shear stresses in trapezoidal open channels for both inbank and overbank flows. The local shear stresses on...

Characterization of Incised Channel Development
A combination of hydraulic and geotechnical techniques have been applied to predict future cross-section morphology in incised channels. The SAM program (Copeland, 1991) computes combinations...

Expansion and Contraction of Powder River Between Moorhead and Broadus, MT: Geomorphic Observations and Numerical Modeling
Sixteen years of annual surveys demonstrate that the channel of Powder River expands at high flows and contracts at low flows. Channel contraction is associated with the formation of benches...

Air Entrainment and Bubble Behavior in Plunge Pools
This study analyzes air entrainment by falling nappes and bubble behavior in plunge pools, using an experimental-analytical-numerical method. The experimental work was done at the Tennessee...

Macro-Roughness Effects on Stream Reaeration
The gas transfer coefficient is key to modeling dissolved oxygen levels in streams. Engineers commonly predict it as a function of mean flow depth, velocity, and slope. Large errors are...

Air Concentration Measurements in Highly-Turbulent Flow on a Steeply-Sloping Chute
The U.S. Bureau of Reclamation's (Reclamation) stepped spillway overtopping protection research program required air concentration profile data be obtained during testing in a large, 15.2-m-high...

Determination of Sediment Profile for a Dry Flood Control Basin
A modification of the standard delta profile method was used to estimate the sediment profile in a dry flood control basin. Dry flood control basins do not have a normal operating pool...

Luo, Ming
The algebraic stress model of turbulence is employed to calculate the 2-D flow field of the Gongzhui reservoir region. The discharge distribution among the discharging structures is achieved...

Numerical Modeling for Sediment-Pass-Through Operations of Reservoirs
Numerical modeling using the FLUVIAL-12 model was made to determine the feasibility and effectiveness for Sediment-Pass-Through (SPT) operation for Cresta and Rock Creek Reservoirs in...

Reservoir Sediment Removal: Hydrosuction Dredging
Hydrosuction dredging is a relatively little-known method of removing sediment deposits from reservoirs. The method is similar to traditional hydraulic dredging except the difference between...

Stochastic Control With Bounded Sample Paths: An Application to Reservoir Systems
The consideration of at least the first two statistical moments for the storage volumes of a reservoir system is crucial in an analysis aimed at determining the optimal operations policies...

Multi-Reservoir System Simulation Design Using C++ and Object Oriented Programming
Scientists and Engineers intuitively perceive the world as objects with interactions and internal processes. Physicists may view there work as different particles exerting forces on each...

Plunge-Pool Scour by Inclined Jets
A series of experiments were performed in a sand-bed plunge pool with circular jets produced by nozzles at different angles and elevations and conveying different flow discharges. The...

Relation of Unit Gravel Discharge to Mean Velocity
In sand-bed streams, the unit discharge of sand varies approximately with the fifth power of the mean velocity and inversely with the median diameter of the bed sediment. Similar relations...

Bed Material and Numerical Modeling in a Gravel/Cobble Bed Stream
The characteristics of bed material in a cobble or gravel river and their use for numerical simulation of flushing flow needs are discussed. There are three types of bed material: 1) material...

Flow and Sediment Transport at River Diversions
Flow pattern and sediment transport at diversions are studied. Submerged vanes are shown to be an effective measure for reducing sediment entrainment. Effectiveness of the vanes is evaluated...

Modeling Kinetics of Sediment Removal in Water Columns
Many physical, chemical, and environmental factors govern the rate of cohesive particle sedimentation in aquatic environments. A new information-based model that uses experimental information...

Discharge-Frequency Relationships in Distributary Flow Systems
The paper describes discharge-frequency relationships in distributary flow systems. The stream network that makes up the flow system is described in terms of how the various stream segments...

Comparison of Infiltration Equations Using Flooding Infiltrometer Data
Based on three flooding infiltrometer tests, 27 hydrographs produced by HEC-1 were used to compare peak discharge, time to peak, and storm runoff volume using three infiltration functions....

Sheet Flow Resistance of Asphaltic Pavements
A statistical study has been conducted by the authors using 400 points of experimental data taken in the 1970's at Texas A&M for sheet flow runoff during artificial rainfall on...

 

 

 

 

Return to search