A Comparison of L-Moments with Method of Moments
A comparison of the Conventional Moments Method (CMM) with the L-Moments Method (LMM) for selecting a distribution is made. Five distributions GEV (Generalized Extreme Value), LNO (Lognormal),...
A Physically Based Methodology for Regional Flood Frequency Analysis
The problem of flood frequency estimation in ungauged catchments is approached by using statistical procedures jointly with derived distribution techniques. The application of this methodology...
A New Look at the Statistical Estimation of PMP
The statistical base of Hershfield's Kmvalue Method and its application for estimating Probable Maximum Precipitation (PMP) were reviewed. The mathematical...
Estimating Exceedance Probabilities of Extreme Floods
Estimates of the exceedance probabilities of extreme floods are needed for risk analysis of dams and nuclear energy facilities. A new approach using a joint probability distribution of...
3D-Simulation of the Twin Lake Tracer Test
The 1983 Twin Lake tracer test was simulated using a three-dimensional finite element model. The model was calibrated comparing calculated and measured piezometric heads as well as vertical...
Investigation of Chloroform Plumes in a Porous Media
A sand box model was used in the laboratory to study the development and stability of the contaminant plume with respect to space and time. Steady, uniform flow velocities were established...
Acidity and Chemistry of Arizona's Snowpacks
Acid snow, the frozen version of the acid rain phenomena, has been sampled in several western states, e.g., California, Nevada, Montana, and Oregon. Measurements of snowpack acidity in...
Spatial and Temporal Characterization of Drought
Drought is difficult to define for common understanding. Several definitions are presented. The Palmer Drought Severity Index (PDSI), the Palmer Drought Hydrologic Index (PDHI) and the...
Probabilistic Characteristics of Elapsed Time Between Rainfalls
The elapsed time between rainfalls is analyzed statistically using the hourly rain data at two locations: the flat-plain at Urbana, Illinois and the northwestern Appalachian foothills...
CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...
Velocity Reduction at a Submerged Pipe Outlet
This paper presents the results of a specific model study to reduce the 17.5 m/s (57.3 ft/s) discharge velocity of a submerged circular pipe discharging at floor level into a 30.5 m (100...
Surface Flows Over Intertidal Marshes
A marsh-flow measuring device has been designed to quantify the flow across the marsh surface. The fluorometric technique by tracking the visible substance (Rhodamine red dye) applied...
A Model for Low-Drag Landslides
Field observations and experimental records indicate that the primary mode of motion of many large landslides is that of sliding rather than flowing. Most of the shear during sliding is...
Debris Flow Velocity Estimation Methods for Natural Hazard Assessment
Debris flows are a special category of fluid and mass flow phenomena in which natural runoff entrains extremely high concentrations of sediment. The sediment-water mixture has properties...
Mechanics of Riprap Movement in Tidal Flow
This analysis emphasizes the need to obtain data on the size and shape of riprap pieces as a function of movement, data which are surprisingly difficult to obtain from published studies....
Modeling the Fate and Transport of Toxic Heavy Metals in South San Francisco Bay
A two-dimensional vertically-averaged finite element model for the fate and transport of cohesive sediments and associated toxic heavy metals was utilized to predict the spatial and temporal...
Relationships Between Flow and Benthic Communities
Current flows can affect directly factors critical to the survival of benthic communities, including the availability of food and nutrients, the chemical quality of water surrounding benthic...
Incipient Motion in Gravel-Bed Rivers
Incipient motion processes are reviewed for bed material in gravel-bed rivers. Prediction difficulties are identified. Research results are reported for field and flume studies to investigate...
Flow and Scour Near an Abutment
Laboratory experiments were used in conjunction with a two-dimensional depth-averaged numerical flow model, RBFVM-2D, to investigate the relationship between flow velocity distribution...
Plunge-Pool Aeration Due to Inclined Jets
The present study quantifies how jet height and nozzle inclination angle and diameter affect the rate of air entrained by inclined circular jets. An air-collection hood and a vacuum pump...
Return to search