Direct Measurement of Turbulence Structures in a Standard Jar Test Tank Using PIV System
Particle image velocimetry (PIV) is applied to the measurement of instantaneous two-dimensional velocity fields in a standard 2-liter jar test tank for several different impeller speeds....
Two- and Three-Dimensional Hydrodynamic Modeling of the Salton Sea, California
The Salton Sea, the largest surface water body in California, faces a myriad of problems related to rapidly changing water levels, rising salinity, accelerated eutrophication, fish kills,...
A Three Dimensional Oil Spill Model
This paper reports the development and testing of a comprehensive three-dimensional oil spill model. At present time, the model components include advection and turbulent diffusion, vertical...
A Combined Physical and Mathematical Modeling Scheme for Kapichira Hydropower Project, Malawi
A physical model and a mathematical model were used to study the flow patterns in a reservoir having a complicated bathymetry. The physical model measurements were compared with the predictions...
Vegetation-Induced Drag: An Experimental Study
Open-channel flow models through vegetative canopies require a quantitative measure of the ability of plants to absorb momentum by form drag, which is commonly characterized in terms of...
On Silt Abrasion Erosion of Three Gorges Hydraulic Turbine in the Future
In this paper the basic parameters of Three Gorges hydraulic turbine have been reviewed and the operation characteristics of Three Gorges hydropower Station pointed out. Combined with...
The Influence of Peak-Regulation of the Three Gorges Power Plant on Navigation
The paper studies the unsteady flow resulted from peak-regulation by daily regulation at both Three Gorges and Gezhouba Power Plants and concludes that the river section between the dam...
Capillary Pressure-Saturation Relationships in Fracture
Understanding and quantifying unsaturated flow through fractures in rocky slope is important for design and construction of drainage system in large-scale hydraulic engineering. The data...
Observations of Tidal Circulation in Mamala Bay, Hawaii
A comprehensive measurement program, designed to study circulation processes and support hydrodynamic modeling, has been carried out in Mamala Bay on the south coast of the Island of Oahu,...
Assessment of Risks of Flooding by Use of a Two-Dimensional Model
In case of rare floods, the rivers might go far away from their minor bed, submerging large areas, eventually with relatively high velocities. One-dimensional models are not suitable to...
Designing Concrete Culverts to Resist Scour Damage
Concrete culverts have been used for over 100 years. In this period, the main design concern centered on structural and hydraulic adequacy of the culvert. Scour is a relatively recent...
Effect of Pump-Ins on California Aqueduct Water Quality
A model has been developed, based on the assumption of constant Aqueduct volume, to predict the effect of ground water pump-ins on Aqueduct water quality. Designated SuperCAMP (California...
Design Modification of Water Supply Intakes in Mountainous Regions
Existing river intakes for several water treatment plants in the mountainous areas of western Venezuela have experienced severe difficulties with deposition of sediment. Excessive sediment...
Numerical Simulation of Hydraulic Jump
Hydraulic jump is numerically simulated by solving the laterally-averaged governing equations. The governing equations are derived for two-dimensional flow by laterally averaging the time...
Application of a Three-Dimensional Model to Assess Seawater Intrusion in the South San Diego Embayment
The San Diego Formation is a Pliocene through Quaternary age aquifer occupying the southwestern-most part of San Diego County. Though the formation is widespread, thicknesses of up to...
Transport Modeling of the Coastal Waters of Oahu, Hawaii
A hydrodynamic model of the coastal waters around the island of Oahu, Hawaii has been constructed to provide quantitative information on the movements and mixing of water that are to be...
Comprehensive Modelling of Water Distribution Networks
An analyst of a water distribution systems must frequently contend with a host of problems with very different time scales. Traditionally, such concerns have been accommodated by having...
A Knowledge Based System for the Design of Open Channels
The design of open channel facilities often calls for evaluation of a unique set of physical conditions which do not lend themselves to standard designs and textbook solutions. Consequently,...
Pollution Transport in Karst
A new model of pollution transport in natural streams was developed and tested. Dead zone storage is modeled as a two time constant process. This approach better matches the observed persistence...
Optimal Sizing of Width- and Depth-Constrained Trapezoidal Channels
Open-channels are often designed based on the assumption of uniform flow and normal depth. If a channel is to be lined with a nonerodible material, the dimensions of the channel can be...
Return to search