Estimation of Urban Storm-Runoff Loads
The United States was divided into three regions, on the basis of mean annual rainfall, to decrease the variability in storm-runoff constituent loads and to improve regression relations...
Advances in Analysis of Structural Masonry
The papers in this book were presented at the technical session, Advances in Analysis of Structural Masonry, at the ASCE Structures Congress '86 held in New Orleans, LA, on...
Evaluation and Upgrading of Wood Structures
Case Studies
The need to evaluate and upgrade existing wood structures stems from concerns of safety and serviceability. These concerns are caused for a variety of reasons which include plans for continued...
Stability Under Seismic Loading
This publication includes five papers that cover the p- ? effect on seismic structures with semi-rigid connections, the effect of panel zone deformations on the structural response behavior,...
Building on Water
During the last century, innovations in concrete have paved the way for the evolution of marine concrete structures. Oakland's proposed Carnation Container Terminal is using...
The Concrete Diagonal
Onterie Center in Chicago, Fazlur Kahn's last major structural design, is a companion in concrete to the diagonally braced steel John Hancock Center. It is a mixed-use building...
Designing for Shock Resistance
If a product or structure is subject to shock loadings, and is unable to take them without unacceptable damage, it must be insulated from the shock. The decision may be to redesign the...
Complexity in Concrete
Centrust Tower in Miami, Fla., is a $95 million, 37 story, 600,000 sq ft tower rising from one side of a block-square 11 story parking garage. Columns on the curved side of the triangular...
Isolating Earthquakes
The Foothills Communities Law and Justice Center in Rancho Cucamonga, Calif., is the first U.S. building to rest on base isolators for protection against a possible earthquake of 8.3 Richter....
Spreadsheets: A New Design Tool
New techniques are developing which make computer programming easier. One new technique is spreadsheet programming for microcomputers. Two programs are presented which give a quick overall...
Wharf Stands on Stone Columns
A wharf was constructed in New Orleans on very weak soils. To prevent lateral and vertical movement of the soil, normally the entire wharf and adjacent structure would be founded on steel...
Design of Strontia Springs Arch Dam
The development of the layout and the history of design of the 292 foot (89 m) high Strontia Springs Dam is presented. While a brief description of the general project layout and foundation...
The OCEANWHEEL Artificial Island
The compression rim and tension spoke structural system (OCEANWHEEL) transfers lateral loads from sea surface to seafloor efficiently. It promises a wide variety of uses beyond the described...
The Estimation of Ice Loads From Caisson Deformations Gulf Canada Molikpaq
The Gulf Canada Resources Mobile Arctic Caisson 'Molikpaq' is a bottom founded steel exploration platform capable of year-round operation in the Beaufort Sea....
Dynamic Global Forces on an Offshore Structure from Multi-Year Ice Floe Impacts
Estimation of global ice forces from ice floe impact against artificial islands and offshore platforms is essential for platform design. The discrete element program, CICE, has been validated...
Ice Floe Impact Force on Vertical Sided Structures
A solution is described that does not assume a contact pressure-area curve or ice crushing strength. The impact force is related to Korzhavin's ice crushing equation by simple...
Ice Forces Due to Impact Loading on a Sloping Structure
Two approximate methods are presented for determining Dynamic Magnification Factors due to floe impact on sloping structures. Some of the physical processes involved are treated simplistically,...
The Role of Ice Gouging in Determining Global Forces on Arctic Structures
Structures built in water depths where ice keels are in contact with the seafloor can experience reductions in the environmental driving forces transmitted to structures due to seafloor...
Ice Loads on Structures With Compound Slopes
Many of the offshore drilling structures proposed for use in the Arctic have sides with multiple slopes. Sloping walls are used at the waterline to cause the ice sheet to fail in bending...
Design of an Icebreaking Offshore Supply Vessel
There are two basic scenarios for icebreaking support vessels. The first is the delivery of drilling fluids and supplies to drilling units and other development operations. The second...
Return to search