A Road to Recovery
Inspections of the Golden Gate Bridge revealed that the bridge had localized corrosion near its expansion joints, corrosion of its reinforcing steel, and was severely contaminated with...
Water Quality Modeling of Key Largo Coral Reef
A numerical model called CORALSIM has been developed for the Key Largo Coral Reef National Marine Sanctuary in the Florida Keys. The model was developed as a management tool to study the...
On-Site Containment of PCB-Contaminated Soils
A remedial investigation/design project, with subsequent post-closure monitoring, was conducted for upland areas containing PCBs at an industrial site in New Bedford, Massachusetts. A...
Roller Compacted Concrete
Roller compacted concrete has emerged recently as an economical material and rapid method of construction for use in gravity dams, overflow structures and heavy duty pavements. The economics...
Hydropower
Recent Developments
The Foothills Project has been under consideration by the Denver Board of Water Commissions for many years. It is one of the major steps in the continued efforts of the Board to provide...
Shrimp Farm Made Feasible
Engineers on a limited budget developed a facility on the island of Oahu, Hawaii, where Mexican blue shrimp are being raised commercially. A series of U shaped sections were laid parallel...
Clay Pipe Installation?Advances in Load Factors
This report presents an evaluation of traditional load factor values for clay pipe and the development of a new bedding system which gives a higher load factor. Tests demonstrate that...
Failure of a Large Reinforced Concrete Pipeline
This paper describes the damage that occurred when a landslide overloaded an 11 ft diameter reinforced concrete pipeline. The 8 ft lengths of pipe, each of 11. 5-in. wall thickness, were...
SPIDA: An Analysis and Design System for Buried Concrete Pipe
The paper presents a description of a new computerized direct design method for buried concrete pipe named SPIDA (Soil-Pipe Interaction Design and Analysis). Also the technical basis and...
Experiences in Concrete Pipeline Construction in Ontario 158-1985
The paper discusses the title subject in terms of concrete pipe fabrication methods and plants, pipe jointing and jointing materials, and construction experiences in the Province of Ontario,...
Buried Fiberglass Pipe Response to Field Installation Methods
In 1970 near Yuma, Arizona, a field test installation of 30 inch diameter fiberglass pipe was constructed. Twelve years later the pipeline was remeasured. Measurements of pipe profile,...
Strains Induced by Combined Loading in Buried Pressurized Fiberglass Pipe
In 1983 Owens Corning Fiberglas and Utah State University collaborated on a study of combined strain behavior of fiberglass pipe to quantify the bending strain reduction as a function...
Long Term Testing of Centrifugally Cast Glass Fibre Reinforced Plastic Pipes (RIRP)
The paper discusses testing of pipe manufactured by centrifugal molding. The tests included external load tests, internal load, hydrostatic internal pressure, and cyclic internal pressure....
Buried Fiberglass Pipe Performance and Installation Requirements and Design Calculations in International Standardization
This paper elaborates on a proposed standard covering details of fiberglass pipe buried installation requirements and criteria for selection of pipe stiffness. It also discusses the selection...
Successful Use of Centrifugally Cast Glassfiber Reinforced Plastic (GRP) Pressure Pipes for Public Works in Sweden
Centrifugally cast GRP pipes were introduced in Sweden 17 years ago for industrial applications mainly as a gravity pipe. The process of pipe manufacturing as well as the pipe itself and...
Proportioning Reinforcement for Buried Concrete Pipe
The proportioning of reinforcement between inner and outer cages that is specified in ASTM Standard Specification C76 for concrete pipe in sewer and culvert applications is examined in...
Influence of Frost Action on the Load Exerted on Buried Pipe
When work was started on revising the Swedish code for concrete pipes at the end of the 70's, a research project was carried out to evaluate the risk of increased load due...
Planned Overtopping of Embankments Using Roller Compacted Concrete
Three recent projects are discussed where the economy and versatility of roller compacted concrete (RCC) were utilized to allow flood water overtopping of small to medium size embankment...
Brazil's Innovation in APM Technology
The paper discusses an automated people mover (APM) called an Aeromovel which consists of pneumatically-controlled vehicles weighing less than 20,000 pounds with a capacity of 300 passengers....
Design and Fabrication of the Guideway Superstructure for the Miami METROMOVER
The guideways for the driverless rubber-tired vehicles are entirely aerial. As a result of severe restrictions on horizontal alignment and pier locations imposed by the downtown Miami...
Return to search