Structural Fire Resistance Design of Wood Beams and Columns: A Comparison of European and North American Practices
North American and Eurocode design methods for fire-resistive exposed wood members provide a very good example of the translation of research into practical engineering design procedures....
Use of Pressuremeter in Mixed Highrise Foundation Design
The pressuremeter has been used extensively for the evaluation of strength and deformation characteristics of the glacial hardpan soils in the design and construction of caisson foundations...
Drilled Shaft Side Resistance in Clay Soil to Rock
An evaluation is made of available field load test data for the axial side clay soils to hard rocks. Conventional total stress interpretations by the alpha method are used to examine the...
Side Resistance of Drilled Shafts in the Denver and Pierre Formations
Results of load tests on drilled shaft foundations in Upper Cretaceous shales are described and evaluated. Three load tests were conducted on shafts in the Denver Formation, in Denver,...
Behavior of Instrumented Model Piers in Manufactured Rock with a Soft Layer
A laboratory test apparatus has been used to study the side resistance of piers socketed into manufactured soft-rock masses. The results of four tests are reported, three of which included...
HUD Concerns: Post-Tensioned Foundations in Texas
An investigation was conducted of post-tensioned slab foundation systems in Texas pursuant to a request from the Headquarters Office's of the U.S. Department of Housing and Urban Development...
21st Century Composites Require ASCE Standards and SDS
This paper describes the ASCE initiative and discusses the philosophy and needs for the structural design system (SDS) of which the standards will be a part. Our perspective is from the...
Going International: Profit or Peril?
Six veterans of the international engineering and construction market discuss the financial risks of international work, including currency risk; expatriate living conditions; difficulties...
Airport Pavement Innovations?Theory to Practice
This proceedings,
Design and Performance of Deep Foundations
Piles and Piers in Soil and Soft Rock
This proceedings,
Report on Ship Channel Design
Strength Design for Reinforced-Concrete Hydraulic Structures
21st Century Timber Engineering
Timber engineering is moving into the 21st Century faced with challenges in technology, governmental mandates and environmental concerns. Engineers are continuously being challenged in...
Back to Iran
Surprisingly to some, Iran continues to rank among the attractive markets of the Middle East. Despite political and economic problems, it is a large market, its location makes it strategically...
Reliability and Uncertainty Analyses in Hydraulic Design
Prepared by the Subcommittee on Uncertainty and Reliability Analyses in Design of Hydraulic Structures of the Technical Committee on Probabilistic Approaches to Hydraulics of ASCE. ...
Reclaiming Clear-Cut Land
The Savannah (Ga.) Airport Commission needed to expand the city's international airport to meet projected needs through 2007. The expansion was designed with Greiner, Inc.,...
Tying Up The Artery
After six years, preliminary design is almost complete on one of the nation's largest, and most complicated, public works project, the Boston Central Artery project. At an...
Can Engineers Cut Curtain-Wall Failures?
For many reasons, including owners' false perception of economy engineers have abdicated responsibility for curtainwall design. Failures of curtainwall components are very...
So Much Pavement, So Little Time
At its most basic, pavement management requires taking inventory of a pavement network, doing a condition assessment, setting up a database, then synthesizing the data collected for an...
A Dome To Remember
Under intense pressure from all sides, a trio of engineering and architectural firms working in San Antonio, Tex., turned the political coal of a stadium everyone wanted to build (but...
Return to search