Computer Simulation of Direct Shear Test
This paper presents a pilot study of a computer simulation of direct shear test on sands using the Discrete Element Method. The numerical test setup is described first, which is followed...
Numerical Integration of Transient Creep Constitutive Equations for Polycrystalline Ice
A numerical time integration algorithm is developed to solved the system of coupled, first-order differential equations characterizing the physically-based constitutive model of Shyam...
Probabilistic Micromechanics in Constitutive Modeling of Granular Material
This paper gives a review of newly developed probabilistic methods for analysis of the effect of randomness in geometry and physical properties at the microscale on their macroscale response...
Joint Network Modeling and Scale Effects in Rock
Joint networks play a vital role in the mechanical and hydraulic behavior of rock masses. A realistic representation of joint geometry in rock masses and correct understanding of the mechanical...
The Transverse Vortex in the Wall Regions of the Turbulent Boundary Layers in the Flows with Adverse Pressure Gradient
The vortical structures in the turbulent boundary layers in the flow with adverse pressure gradient were investigated by the hydrogen bubble technique. The vortices were visualized in...
Vortex Suppression in Wet-Pit Pump Intakes
Two distinct examples to suppress both air-entraining and boundary-attached subsurface vortices in large vertical pump intakes are presented that were developed by means of hydraulic model...
On the Modelling of Damage Due to Volumic Variations in Cementitious Composites
Two kinds of volumic variations are considered. Those due to thermal gradients on hardened concrete and those due to hydration processes at early ages. Models based on damage mechanics...
Nonlinear Analysis of Strain-Softening Damage under Monotonic and Cyclic Loading
The paper reviews the modeling of damage by the microplane model and presents extensions required for cyclic loading. The general microplane constitutive model is implemented in a three-dimensional...
Dugdale Model Applied to Crack Interactions
It is doubtful that modelling crack interactions problem within the context of elasticity adequately reflects the physical aspects as the failure of brittle material is approached. A model...
Mechanics of Growing Deformable Solids: A Review
An attempt is undertaken to summarize the contemporary knowledge in mechanics of deformable solids of accruing mass. A general mathematical model of an abstract growing deformable solid...
Steady-State Nonlinear Heat Transfer in Multilayered Composite Panels
A two-dimensional computational model is developed for the nonlinear heat transfer in multilayered composite panels. The model is based on a first-order thermal lamination theory with...
Probabilistic Assessment of Composite Structures
Formal procedures are described which are used to computationally simulate the probabilistic behavior of composite structures. The computational simulation starts with the uncertainties...
Experimental and Theoretical Dynamic Compliances of Foundations
An experimental study of the dynamic behavior of surface foundations on granular soils by centrifuge modeling is presented. The test method allows a direct measurement of the complex-valued...
Harmonic Excitation of an Unconstrained Saturated Particle Bed
Past research on the flow of concentrated cohensinless mixtures have historically emphasized steady or quasi-steady motions while dynamic effects have received little attention in comparison....
Dynamic Stability of Composite-Material Circular Cylindrical Shells with Orthogonal Stiffeners
The governing equations are formulated for general (axisymmetric or unsymmetric) vibrations of thin circular cylindrical shells of composite material and reinforced with axial (stringer)...
Routes to Chaos of a Vertically Rotating Pendulum
Each blade of a mechanical shredder may be modeled by a pendulum whose pivot rotates in a vertical circle. The transition to chaos of small periodic motion about radial lines us the driving...
Updating Dynamic Models and Their Associated Uncertainties for Structural Systems
The problem of updating a structural model and its associated uncertainties using dynamic test data is addressed, considering uncertainties which arise from measurement noise, modeling...
Applications of Viscoelastic Damper to Jointed Structures for Seismic Mitigation
Some structures, such as dams, are built with contraction joints that might carry some small tensile stresses. Such joints are expected to open and close during an earthquake. That will...
Intra Vena Cava Balloon Pumping
An innovative prototype intravenous hollow-fiber oxygenator was developed in 1984 by B.G. Hattler. The device consisted of a microporous, hollow-fiber membrane oxygenator inserted into...
An Evaluation Study of Modified Mohr-Coulomb and Cap Models
Two failure criteria, namely Mohr-Coulomb and cap models, are considered in this paper with some modifications. Mohr-Coulomb theory is applied to concrete after stress and strain cut-offs...
Return to search