Hydraulic Aspects of a Low-Velocity, Inclined Fish Screen
The Potter Valley Hydroelectric Project diverts up to 310 cfs from Van Arsdale Reservoir on the Eel River in north-central California and delivers it to Potter Valley for power production...
Flow Resistance Properties of Flexible Linings
Flow resistance for flexible channel linings is a function of the relative roughness of the lining in accordance with boundary-layer principles. As with vegetation, flexible linings have...
Cable-tied Concrete Block Erosion Protection
An articulated concrete erosion protection system is investigated as a possible revetment for bridge piers to be used in place of the traditional rip-rap revetment. The system consists...
Tetrapods as a Scour Countermeasure
Few materials have been studied for their effectiveness in protecting bridge piers and abutments from local scour other than riprap. Recent research conducted at the FHWA research facility...
Threats to Bridge Stability from Scour Related Failures of Drop Structures
Catastrophic failure of bridge foundations may occur when channel bed elevations are lowered unexpectedly. Bridges to be constructed in channels that are known to have bed degradation...
Hydraulic Modeling of High Unit Discharge Energy Dissipators
The incorporation of an efficient and economical energy dissipation device is critical with respect to the safe operation of a high unit discharge spillway. The development and design...
Model Study of Center Hill Fuse Plug Spillway
Model tests of a fuseplug spillway mounted on the fixed crest of an embankment dam were conducted to develop a satisfactory design that would fail in a orderly fashion at a prescribed...
Emergent Techniques in Scour Monitoring Devices
This paper presents a brief status report of a research and development project funded by the National Cooperative Highway Research Program (NCHRP) to develop and test scour monitoring...
Riprap Design at Bridges?Factor of Safety Approach
The factor of safety method offers a physically based methodology for design of riprap that relates the applied shear stress on the channel boundary to the stability of the riprap layer....
Riprap Coverage Around Bridge Piers
Experiments were conducted to examine the effect of riprap size and coverage on reducing local scour at bridge piers. Pier diameter, bed material size, riprap size and diameter were varied...
Predicting Critical Scour Stage at Bridges
After an initial level I screening process, most level II bridge scour studies result in recommendations for costly scour countermeasures. Typically, existing transportation budgets cannot...
Scour Retrofit Case Studies for Arizona
Scour retrofit involves a coordinated analysis and joint determination of action by several engineering disciplines: typically, geotechnical, hydraulic and structural engineering. The...
Distorted Physical Models for Mixing Studies
The frictional resistance and mixing process affected by roughness bars are investigated. Specific combinations of the size and layout of the bars for various flow conditions are suggested...
Determination of Pulsating Pressures for Baldhill Dam, N.D. Spillway
Model tests of the existing Baldhill Spillway were conducted with symmetrical and asymmetrical gate openings to determine for various flow conditions the characteristics of the hydraulic...
Innovations and Practical Procedures for Hydraulic Model Applications in Bridge Scour Evaluations
Procedures for data conversion, and establishment of downstream boundary conditions for a hydraulic computer model for estimation of riverbed scour at bridges are presented. The data conversion...
Practical Comparison of One-Dimensional and Two-Dimensional Hydraulic Analyses for Bridge Scour
The Kentucky Transportation Cabinet, Department of Highways is working with the Indiana Department of Transportation and the Federal Highway Administration to plan, design, and construct...
Model Study of Local Scour Downstream Bridge Piers
A deep scour hole downstream of a large circular pier has been developed at Imbaba bridge, which is considered one of the major bridges across the Nile River in Cairo, Egypt. At that location...
Effect of Fenders on Local Pier Scour
Physical model experiments were performed in the Hydraulics and Sediment Research Institute, Delta Barrage, Egypt, to determine the effect of fenders on the scour depth around circular...
Hydraulic Modeling and Mapping of Mud and Debris Flows
The prediction of hyperconcentrated sediment flows on alluvial fans was advanced through the development of a two-dimensional, finite difference flood routing model FLO-2D. The model simulates...
Design of a Curved Baffle Energy Dissipation Structure
A curved baffle energy dissipation structure was designed and constructed based on the results of hydraulic and analytical models. Field tests of the prototype demonstrate close comparison...
Return to search