Material Properties Related to Pavement Performance
As part of the Strategic Highway Research Program, an effort has been made to review research literature which can be used to relate asphalt properties to pavement performance. This report...
Relationship Between Laboratory Aging Tests and Field Performance of Asphalt-Concrete Mixtures
Aging of asphalt mixtures is primarily associated with loss of volatile components and oxidation in asphalt during the construction phase (short-term aging), and progressive oxidation...
Load-Deflection Performance of FRP Molded Grating
This research project deals with fiberglass reinforced plastic (FRP) molded grating, its properties, manufacturing materials used and appearance. Grating strength, configuration, weight...
Shear Properties of Pultruded Glass FRP Materials
The in-plane shear modulus and the in-plane shear strength of a variety of pultruded glass fiber reinforced plastic (FRP) materials were measured experimentally in a pilot test program...
High Strength, High Denier Discrete Polymer Fiber in Cementitious Composites
A series of 3-point beam tests were performed on the cementitious composites specimens reinforced with high strength, high denier discrete polyester fibers. The fiber length, fiber volume...
Field Performance of Fiber Reinforced Concrete Highway Pavements
This paper reports the evaluation of field performance of fiber reinforced concrete pavements. The concrete was designed for a compressive strength of about 40 MPa. Steel fibers with hooked...
Brittleness Index of Cementitious Composites
Series of direct tension tests were conducted to observe the softening response of different types of cementitious composites, namely, mortar, plain concrete, high strength concrete, normal...
Laboratory Fatigue Investigation of a GRP Bridge
A fatigue study of a 4.9 m glass-reinforced plastic bridge indicated a resistance to 1.6 million cycles of load without extensive damage to joints or elements. Viscoelastic creep occurred...
Durability of High-Strength Concrete Containing Fly-Ash and Silica Fume
The durability of high-strength concrete made with local materials were tested with regard to the freezing and thawing resistance of concrete in accordance with ASTM C666 procedure A....
Properties of Flyash Cellular Concrete
A research program was conducted with the aim of studying the physical and flexural properties of cellular concrete containing flyash. Two different types of fibers were also added to...
Drying and Shrinkage of Concrete: The Case of Massive Parts
The natural drying of concrete induces a number of intense mechanical effects on the structures. These various effects are of importance to engineers: in the design stage (estimate of...
Environmental Degradation of Concrete Pore Structure
This paper illustrates how Conductometric Phase Transition Porosimetry can be used to monitor changes in the pore structure of Portland Cement Concrete which result from repeated freezing...
Notch Sensitivity of Ice
Few investigators have examined closely the fracture toughness of macrocrystalline and seeded columnar freshwater ice. There has been a wide scatter in the toughness values obtained even...
Uni- and Bi-Axial Compressive Fatigue of Fiber Concrete
Fatigue behavior of fiber reinforced concrete is studied under uniaxial and biaxial loadings. The S-N curves and the cyclic deformations of fiber concrete are compared to those of plain...
Measurement of Impact Fracture Toughness of FRC
Instrumented impact tests have been in use since the early eighties for studying the fracture characteristics of cement-based composites at high rates of loading. While significant progress...
AE Instrumentation and Deconvolution Techniques
This paper describes the difficulties and solutions achieved in applying advanced Acoustic Emission (AE) signal analysis techniques to fracture mechanics. The test specimen is a double...
Evaluation of High Strength Concrete by the Break-Off Method
The reliability of the Break-Off method to test inplace high-strength concrete is investigated. A total of 188 Break-Off tests and 30 standard cylinder tests are carried out for this project....
Displacement Measurement by Laser Interferometry and Image Analysis
Laser holographic interferometry was used for the evaluation of displacement fields on concrete and fiber reinforced concrete specimens. Transmission holography was used to analyze mortar...
Localization Instabilities Due to Damage and Fracture Propagation: Application to Tensile Specimens
In recent research it has become clear that localization of damage due to strain softening as well as propagation of interactive cracks can result in bifurcations of the loading path characterized...
Selected Earthquake Engineering Papers of George W. Housner
Sponsored by the Structural Division of ASCE. This volume collects key papers on earthquake engineering by George W. Housner, who more than any other...
Return to search