Design of Marina Replacement Facilities
A majority of the waterfront design projects within the State of California are for the replacement of existing facilities since the densely populated shoreline areas are already heavily...
Riprap Design in Marine Terminals
Navigation vessels in otherwise quiescent waterways sometimes generate forces that require stabilization of the bed or banks. Since riprap is an accepted and dependable means to armor...
Proposed Seismic Design Method for Piers and Wharves
Current seismic provisions of the 1991 Uniform Building Code (UBC-91) and the 1983 AASHTO Seismic Design Specifications (AASHTO) are compared as they relate to piers and wharves. An alternate...
Seismic Rehabilitation of Seattle's Pier 69
The Port of Seattle, one of the largest on the west coast of North America, made a strong statement regarding their support for reusing existing structures when a decision was made to...
Seismic Survey Considerations in the Planning and Design of Dredging Projects for Marine Terminal Facilities
This paper presents a case study of the value of high resolution seismic survey information when planning and designing a dredging project for a marine terminal facility. Advances in high...
A Computational Berthing Model for the Design of Fender Systems
The IRF numerical model has not been widely applied to the design of fender systems although the method has been extensively confirmed by hydraulic model tests and partially verified by...
Design Criteria for Ferry Landings
This paper describes an ongoing research project conducted by the University of Washington Department of Civil Engineering to develop design criteria for the Washington State Ferry System....
Land Reclamation Design for the Port of Los Angeles' 2020 Plan
In order to meet future cargo demands the Ports of Los Angeles (POLA) and Long Beach in conjunction with the United States Army Corps of Engineers have conducted a long-range planning...
Naval Homeport Facilities at Pensacola, Florida, and Mobile, Alabama
Presented herein are histories for the planning, design, and construction of the Navy's two newest homeport waterfront facilities in the Gulf of Mexico. Included are the waterfront facilities...
Design and Construction of Waterfront Facilities at U.S. Navy Homeport at Ingleside, Texas
The waterfront facilities for the largest of the Navy's new homeports in the Gulf of Mexico were completed in 1990. The project included over 2,500 feet (762 m.) of deep draft bulkhead...
Floating or Fixed Dock for RO/RO Ship Operations
Floating pontoon-type dock structures are typically used for RO/RO ship berthing. Primary advantage of a floating dock for RO/RO berthing is the relatively constant height relationship...
Model Tests for Expansion of Anaheim Bay Naval Harbor
Modifications to the Anaheim Bay, California, Harbor complex have been proposed to enable larger ships to access the existing wharf for direct loading of ordnance. In addition, new deepwater...
Upgrading Today's Terminals for Tomorrow's Needs
This paper describes how a 1940's vintage, timber pile supported wharf is being modernized to serve post-Panamax ships: how the Massachusetts Port Authority (MASSPORT) is rebuilding their...
Replacement of a Deteriorated Steel Sheet Pile Bulkhead
This paper presents a life history of a marine steel sheet pile bulkhead, over 35 years old, that has been exposed to a salt water environment with minimal maintenance or repair in the...
Terminal Asphalt Patching: An Innovative Approach
Asphaltic concrete has dominated the terminal industry as the pavement of choice for years. It is readily available and economical to install but requires considerable maintenance expense....
Container Terminal Gates Flexible Design for a Dynamic Environment
A paper entitled 'Container Terminal Gate Efficiency Hinges on Flexibility' was presented at ASCE Ports '89 by Larry Nye of Cash & Associates Engineers. The paper summarized the...
Draft Chapter 2?Planning and Design Guidelines for Small Craft Harbors?Entrance Design and Breakwaters
The paper will present a very preliminary draft of the second chapter of an ASCE manual that is currently being developed. The new manual is entitled Planning and Design Guidelines for...
Highway Construction and a Trout Stream Relocation
In 1970, a ten-mile section of Traffic Route 15 in the northern portion of Lycoming County extending into Tioga County was under design as a two-lane limited access highway on four lane...
Probability of Bridge Failure Due to Pier Scour
Methods have been presented for computing the probability of bridge failure due to pier scour either using a maximum scour depth model or a time-dependent model. The probability of failure...
Design Criteria and Specifications for Pipeline Rehabilitation Projects
Pipeline rehabilitation, while not a completely new technology, is nevertheless a fairly recent development, just now coming to the forefront as to common usage. It is not however a fail-safe...
Return to search