Hydraulic Availability Evaluation of Urban Water Distribution Systems
This paper presents a concept for evaluating urban water system reliability using an extended period hydraulic simulation model in conjunction with mechanical availability analysis. Reliability...
Development of Scour Channel After Spillway Failure
In November 1985 parts of the spillway which controlled the water level in Lake Charleston failed during a moderate flood event. The spillway failure resulted in formation of a large 'sinkhole'...
Low Head Dam Safety Studied with Hydraulic Models
Use of physical models to study the hydraulic jump or submerged roller action created as water overflows low head dams provides an opportunity to develop design criteria for various structure...
Model for the Optimal Rehabilitation and Replacement of Water Distribution System Components
The objective of the model presented is to determine the minimum cost solution, given the nonlinear nature of the equations required to describe the cost and the hydraulics of a water...
Estimation of Navigation-Dam Discharge in Illinois
Techniques were used to estimate discharge for the Brandon Road Dam on the Des Plaines River and the Dresden Island, Marseilles, and Starved Rock Dams on the Illinois River in northern...
Spring Creek Dam is Ready for the PMF: A Case History
Spring Creek Dam is the first earth embankment dam in Colorado, with inadequate spillway capacity, to be modified utilizing roller compacted concrete (RCC). With a structural height of...
Modelmania
The idea that model testing could be useful in planning for the control of water in rivers and other waterways received little support in this country until John R. Freeman's...
Evaluation of Sand as a Modeling Material Using Vellinga's Guidance
An experimental series of flume tests were conducted using three sizes of sand as modeling sediment in order to evaluate the effect of sediment grain size and the range of validity of...
Advanced Concept for Generation of Waves in Hydraulic Models
This paper describes a new wavemaker for the generation of naturally occurring waves in physical models of coastal areas. Recent research incorporating directional aspects of monochromatic,...
Hydraulic Model Investigation of the North Diversion Structure, Albuquerque, New Mexico
The North Diversion Structure diverts storm runoff around Albuquerque, New Mexico. Observed flow conditions have caused concern about the capacity of the structure and the safety of a...
Physical Modeling to Study the Extent of Removal of an Existing Lock and Dam on the Mississippi River
Locks and Dam No. 26 is located on the Mississippi River approximately 202. 9 river miles above the mouth of the Ohio River. This paper will discuss the utilization of a physical model...
Developing a User Friendly System for Water Distribution Management Applications
A hydraulic computer model of a water distribution system that can be updated with current billing (customer meter readings) information automatically. The model was calibrated with field...
Composite Resistance to Flow With an Ice Cover
Recent data collected on several rivers in Michigan suggest, with only an ice cover present, that Manning's roughness ratio is constant at n//R equals 0. 65. If other ice...
Regulatory Floodway Width Estimation
A simple algebraic equation is presented for determining the width of the regulatory or designated floodway. The equation shows that for a given ratio of the permissible increase in flood...
Nuclide Migration from Areal Sources Into a Fracture
The authors show analytic solutions to the problem of hydrogeologic transport of radionuclides released from finite areal sources into a planar fracture. The authors illustrate the solutions...
Hydraulic Model to Improve Debris-Handling Capability of Waterford Unit 3 Intake Canal
A 1:30 scale model was used to test the effectiveness of various modifications to the Waterford Unit No. 3 intake canal. The objective of the study was to assist in the development of...
Low Head Hydropower Finite Element Analysis
Finite element analysis provides a means of predicting the flow conditions resulting from the operation of a proposed hydropower facility. The results of a finite element flow analysis...
Calculating Runaway Pressure Surges in Small Hydro Units
Determination of the runaway speed and concomitant pressure surges requires consideration of both the turbine rotodynamics and the waterhammer equations. In this paper a simplified method...
Methods for Specification and Verification of Hydraulic Design in a Turnkey Construction Contract
The project site is at the Hannibal Locks and Dam at New Martinsville, West Virginia. The existing project, a Corps of Engineers' (Corps) facility built in the 60's...
Red River Pilot Channel Design and Development
This paper presents the design parameters for two pilot channels constructed on the Red River. The factors often associated with the development of pilot channels are identified in an...
Return to search