The Saint Lawrence River System, Atlantic Coast of Qu?bec
At the 1:250,000 scale, Quebec has 13 773 km of coasts, 6 772 km of which belong solely to the Saint Lawrence River System. This system can be divided into six portions: river, limnetic...
Flow and Transport of Nonaqueous Phase Liquids in Groundwater Systems
Nonaqueous phase liquids (NAPLs) are present at numerous hazardous waste sites and are suspected to exist at many more. Due to the numerous variables influencing NAPL transport and fate...
Computer Aided Design and Cost Estimation of Gabion Lined Channels
Rivers are a dynamic part of the hydrologic cycle. Changes in discharge, flow depth, water velocity, and meander patterns contribute to this dynamic nature. As a result, portions of a...
Design of Riprap Stilling Basin for Overhanging Pipe
The rock rip-rap basin is the most common and economical method of handling the problem of scour at a pipe outlet. The advantage of the method is speed of construction, absence of the...
Mass Transport in Mud Layer Induced by Wave Action
This paper analyzes the mass transport velocity in a two layers system produced by wave action. In a previous paper, Piedra Cueva (1933), a theory for linear water waves propagating in...
Assessment and Prediction of Debris-flow Hazards
Study of debris-flow geomorphology and initiation mechanism has led to better understanding of debris-flow processes. This paper reviews how this understanding is used in current techniques...
Drilled Shaft Side Resistance in Clay Soil to Rock
An evaluation is made of available field load test data for the axial side clay soils to hard rocks. Conventional total stress interpretations by the alpha method are used to examine the...
Load Testing of Permanently Cased Drilled Shafts Founded in Hartford Shale
The axial and lateral load testing of three, 30 inch (76cm) diameter, permanently cased drilled shafts is analyzed herein. The prototype shafts were founded in (or on) Hartford Shale bedrock,...
Perimeter Load Transfer in Drilled Shafts in the Eagle Ford Formation
Results of six full-scale compression loading tests at four sites in the Dallas area are considered. Compressive strengths (qc) of the rock varied...
Side Resistance of Drilled Shafts in the Denver and Pierre Formations
Results of load tests on drilled shaft foundations in Upper Cretaceous shales are described and evaluated. Three load tests were conducted on shafts in the Denver Formation, in Denver,...
Behavior of Instrumented Model Piers in Manufactured Rock with a Soft Layer
A laboratory test apparatus has been used to study the side resistance of piers socketed into manufactured soft-rock masses. The results of four tests are reported, three of which included...
Design and Performance of Deep Foundations
Piles and Piers in Soil and Soft Rock
This proceedings,
Hong Kong's Wastewater Underground
Standard Hong Kong methods for siting the new $18 million Stanley Wastewater Treatment Plant in Hong Kong Island's South District were running into trouble. The rocky coastal...
Calendar: Bridges 1994
Featured bridges are: Briggs Bridge (AK); Stone Arch Bridge (NY); Rio Grande Gorge Bridge (NM); Bridge Street Bridge (MI); Hennepin Avenue Bridge (MN); Egypt Pike Bridge (OH); William...
In-Service Durability Evaluation of Armourstone
A summary flow diagram for rock evaluation, general to all rock types and engineering applications of rock is introduced. It is then applied to armourstone. Increasing detail within this...
Laboratory Testing of Stone for Rubble Mound Breakwaters: An Evaluation
The quality of the final stone product hinges on the combination of two factors - rock properties and environmental conditions. The environmental conditions associated with production...
Physical Model Testing of Broken Armor Stone
Cracking, breaking into two or more pieces, flaking, crumbling, and abrading may reduce an armor stone to a size where wave action can remove it from the structure causing a local instability....
U.S. Experience With Armor-Stone Quality and Performance
In the past 30 years problems with deterioration and cracking of armor stone in the United States have been concentrated in northern regions, particularly around the Great Lakes. The explanation...
Improving Stone Placement Specifications
Thorough preparation of stone placement specifications can go a long way toward keeping projects on track. But developing well-prepared placement specifications is not easy. It requires...
Stability of Rock Armour Under Random Wave Attack: Performance of Non-Standard Rock Shapes and Gradings
Quarried rock is frequently used to protect coastal and shoreline structures against wave attack. Armour rock specifications generally exclude rock that is rounded or tabular, and gradings...
Return to search