Measurements of Bridge-Scour Depths in Mississippi
This paper briefly summarizes 190 measured pier-scour depths collected dur ing 1942?94 at 22 selected bridges in Mississippi and presents an envelope-curve equation for the data. The envelope-curve...
Design Guidance?Instream and Bank Restoration Structures
Despite an urgent need for river and stream restoration design criteria, little guidance has emerged in recent years. Existing guidance is largely unsatisfactory, promoting empiricism...
Design Guidelines for Bioengineered Bank Stabilization
Design of bioengineered slope stabilization measures in riverine environments to minimize rates of stream bank erosion requires accounting for hydrologic, hydraulic, geomorphic, geotechnical,...
River Restoration Considerations Beyond Channel Design
Restoration of river systems in highly disturbed environments poses unique challenges beyond channel design. The Jordan Creek Restoration project in Idaho was conducted in a valley disturbed...
McAlpine Intake Model Study for Innovative Lock Design
The McAlpine Locks and Dam Project is located on the Ohio River near Louisville Kentucky. Construction of an additional 33.53-m-wide (110 ft) by 365.76-m-long (1200 ft) navigation lock...
Filling and Emptying System Model Study for the Innovative Lock Design
Funding constraints have generated innovative ideas regarding the hydraulic system of proposed navigation locks. Two fundamental questions addressed in the innovative lock design study...
Sims Bayou: The Public Speaks?The Corps Listens
After about ten years of coordinating, planning, engineering, and design, advertising the first construction contract for the Sims Bayou flood control project was only months away. At...
Restoration of Abandoned Meanders on the Middle Fork Forked Deer River, Tennessee
The Middle Fork Forked Deer River in western Tennessee historically had a sinuous course within a wide floodplain. In the early 1900's, local interests dug large straight...
Managing the Impacts of Storm Surges on Victoria Island, Lagos, Nigeria
Victoria Island is one of the barrier islands along the Nigerian Coast. The others are Lagos, Lekki, Ikovi, and Badagry. A general characteristic of these barrier islands in Nigeria is...
Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Developing a Rating Table for the Central Diversion Dam Radial Gates
The Central Nebraska Public Power and Irrigation District uses radial gates for flow control throughout its system. The rating tables for five radial gates on a diversion dam are in error,...
Discharge Characteristics of Overshot Gates
Overshot gates are becoming increasingly popular for controlling water levels in open channels because of the ability of the gates to handle flow surges with limited depth changes. While...
The Effects of Water Surface Profiles on Manning's Roughness Coefficient
The Manning Equation has wide application in engineering practice. Nonetheless, certain aspects of it are still not widely understood. Often, engineers deduce the value of Manning's...
Evaluating Hydraulic Roughness in Tunnels
Much of the data presented in the literature on measured friction losses in tunnels are given in terms of the Darcy-Weisbach
Two Dimensional Modeling of the Mobile River Delta and the Mobile Bay System
Two dimensional hydraulic modeling of Mobile Bay and the Mobile River Delta was conducted to determine critical hydraulic conditions for scour evaluations at bridges in the Mobile Bay...
Contraction Scour at Bridges: Analytic Model for Coarse-Bed Channels
Contraction scour at bridges spanning coarse-bed channels is evaluated based on mass conservation of both water and transported sediment between a reference channel section near the crossing...
The HEC NexGen Software Development Project
The NexGen project is developing successor software packages to the existing family of HEC computer programs. Development is occurring via teams comprised of technical specialists, computer...
Hydrologic Modeling System
The Hydrologic Modeling System (HEC-HMS) is new-generation software for precipitation-runoff simulation that will supersede the Hydrologic Engineering Centefs HEC-l program. Technical...
HEC-RAS (River Analysis System)
HEC-RAS (River Analysis System) is an integrated system of software, designed for interactive use in a multi-tasking environment. The system is comprised of a graphical user interface...
Next Generation Flood Damage Analysis Program
The Hydrologic Engineering Center has developed a next generation Flood Damage Analysis computer program for formulating and evaluating flood damage reduction plans. The program design...
Return to search