ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Using the SedBed Monitor to Measure Bed Load
An acoustic distance measuring device (SedBed Monitor) was developed to accurately measure bed surface transects in a sediment and water recirculating flume. From these transects the rate...

An Investigation of Turbulence in Open Channel Flow via Three-component Laser Doppler Anemometry
A three-component laser Doppler anemometer is used to reexamine the distribution of single-point mean statistics in a nearly uniform fully-developed 2D turbulent open channel flow of water...

Experimental Study on Turbulent Structures in Unsteady Open-channel Flows
Turbulence measurements in unsteady open-channel flows over smooth beds were conducted accurately by the simultaneous use of two-component LDA system and water-wave gauges. In the inner...

Response of Velocity and Turbulence to Abrupt Changes from Smooth to Rough Beds in Open-channel Flows
Response of velocity distribution and turbulence characteristics to abrupt changes of bed roughness have been investigated experimentally with two-component laser Doppler anemometer (LDA)....

Visual Investigation of Field Bed-Load Sampling
An instrument for bed load sampling was developed consisting of an underwater video camera for visual observations. This instrument is called the Delft-Nile sampler and its design, efficiency...

Estimation of Mean Velocity for Flow Under Ice Cover
Methods of estimating mean velocity in a vertical from point velocity measurements are compared for an ice-covered channel. The comparison is based on velocity profiles obtained from a...

Innovative Instrumentation for a Physical Model of River Ice Transport
Large physical models often require the use of innovative instrumentation and measurement techniques. Hydraulic models that attempt to simulate the effects of stationary ice covers put...

Experimental Study on Unsteady Flow in Open Channels with Flood Plains
Hydraulic characteristics of unsteady flows were investigated experimentally in open channels with flood plains using a computer-controlled water supply system. Some noticeable features...

Coherent Structures in Compound Open-Channel Flows by Making Use of Particle-Tracking Visualization Technique
In this study, images of very small 100 ?m diameter particles uniformly suspended in compound open-channel flows were recorded on an optic disc using a high-sensitive CCD camera and 2W...

Instrumentation Needs and Possibilities: A Dialogue Between Suppliers and Users
The present symposium includes a panel discussion to address and illuminate needs and possibilities in hydraulic instrumentation. The panel discussion is organized with the intent of promoting...

Practical Method for Calculating Contraction Scour
Total scour at bridge crossing waterways consists of long-term aggradation or degradation of the streambed, contraction scour and local scour at the piers and abutments. This paper will...

Impacts of Low Flows on the Alluvial Rivers of the Southwest Region of Bangladesh
The Ganges River, which flows out of China through Nepal and India and finally into Bangladesh, has been subjected to continuous scrutiny as conflicts regarding the diversion of water...

Contaminant Fate and Transport Model in Pool-and-Riffle Streams
The complex nature of solute transport and transformation processes in natural streams has been investigated using numerical solution of a proposed mathematical model. This model is based...

GIS-Based Channel Extraction and Smoothing Algorithm for Distributed Hydrologic Modeling
An algorithm is developed to extract dendritic channel networks from Digital Elevation Model (DEM) data. This algorithm, in conjunction with the GRASS Geographic Information System (GIS),...

Combination of an Automated Channel Network Extracting System and a Distributed Watershed Model in Estimation Rainfall-Runoff Processes
Due to the improvement of accuracy and availability of Digital Elevation Models (DEMs), hydrologic researches which utilize DEMs have gradually reached sound results. In this paper, we...

Modeling of Maximum Velocity in Open-Channel Flow
A great deal of information about an open channel flow is contained in the maximum velocity, which, along with the entropy parameter, can determine the mean velocity. Therefore, the maximum...

Ice Accumulation Rate and the Geometry of Ice Jams in River Bends
Experiments on development of ice jams in river bends were performed in a 2.60-m-wide bend flume with a sand bed and 5-mm-diameter plastic beads simulating ice particles. The ice particles...

Mathematical Models to Assess Stream Dynamics
A methodology is proposed to predict the behavior of meandering streams. Using a stream-shift model, lateral channel shift over a period of time is computed for several reaches with the...

Revised Hydraulic Design of the Rio Hondo Flood Control Channel
The US Army Engineer District, Los Angeles has completed a major review study of the Los Angeles County Drainage Area (US Army, 1992) and has determined that the existing flood control...

Improved Hydraulic Features of the HEC River Analysis (HEC-RAS)
The Hydrologic Engineering Center (HEC) is in the process of developing a Next Generation (NexGen) of hydrologic engineering software. The goal in the area of river hydraulics is to develop...

 

 

 

 

Return to search