A 2D numerical simulation of the Po river delta flow
A numerical simulation of the steady flow in the proximity of the delta of the Po river has been carried out. We consider the 2D quasi-hydrostatic model, approximating non conservation...
Quasi-Two Dimensional Modelling of Flood Routing in Rivers and Flood Plains by Means of Storage Cells
A quasi-two dimensional numerical model for flood routing in rivers and flood plains has been developed. In the river, the St Venant equations are integrated using the implicit finite...
Modelling of Flood Wave Propagation Over Flat Dry Areas of Complex Topography in Presence of Different Infrastructures
After a description of the general equations which govern the propagation of a 2D flood wave (shallow water equations), a review of the scientific publications on the integration of their...
Formation and Propagation of Steep Waves: An Investigative Experimental Interpretation
From the end of the last century, many Authors have studied experimentally the formation and the propagation of steep waves on dry flume bottom. Up to the present time, however, some aspects...
Free surface flow modelling on a complex topography
The aim of this paper is to describe the different construction stages and the validation of a free surface flow model on a complex topography. This model is based on the two dimensional...
Flood Propagation on Mobile Beds under Mountainous Flow Conditions
An implicit finite-volume scheme is used to solve the shallow water equations under mountainous flow conditions. The algorithm is stable for sub- and supercritical flows and moving internal...
Reliability and Validity of Modeling Sedimentation and Debris Flow Hazards Over Initially Dry Areas
Extreme floods may inundate populated areas of a river valley that are normally dry. Two-dimensional flow analysis is a useful method for predicting the spatial and temporal behavior of...
A comparison between computed and measured bed evolution in a river bend
A shallow-water scheme with a movable bed has been employed in order to check the reliability of computations related to the bed evolution when a substantially three-dimensional phenomenon...
Measurement of Turbulent Properties in a Natural System
Instruments designed to measure flow properties in stratified estuaries, lakes and oceans are reviewed. Emphasis is given to the measurement of turbulent fluxes and recent developments...
Using Drop Structures for Stream Gaging
A long term monitoring program of 15 watersheds, for the purpose of studying channel response to erosion control measures being constructed in north Mississippi, is being conducted by...
A Computerized Open Channel Flow Measurement Device
This is a technical information paper with the intention of introducing a new product. It is not the intent of the author to use this as a marketing tool. However, it is the intent to...
Laboratory and Field Evaluation of Acoustic Velocity Meters
A project is currently underway to evaluate the performance of 27 acoustic flowmeters used at Hoover, Davis, and Parker Dams on the lower Colorado River. Field surveys and laboratory testing...
Mapping 2-D and 3-D Velocity Components in Circular Conduits Using an Electromagnetic Current Meter and a 5-Hole Pilot Probe
The techniques presented in this paper facilitate the visualization of the two-dimensional and three-dimensional flow fields at arbitrary sections in a conduit. They have been used to...
Velocity and Turbulence Measurement from the Illinois and Mississippi Rivers
This paper presents a data measurement program that was used for collecting the velocity data associated with barge-tow traffic on the Illinois and Mississippi Rivers and includes a discussion...
Velocity Measurements by the One-Orange Method
Application of the most sophisticated instrumentation - so called state-of-the-art equipment - is not always necessary nor even desirable for measurement of mean velocities in verticals,...
Experimental Design and Measurement Techniques for Investigation of Two-Phase Flow
Discussing the relevant hydraulical and inter-phasial processes of two-phase flow in open tanks the necessary requirements for set-up and operation of physical model studies are worked...
Sediment Measurement Instrumentation A Personal Perspective
The development of the suspended sediment samplers in the 1940s was a major contribution to the science of sedimentation and provided for the proper development of dams, reservoirs, and...
Low-Cost Bridge Scour Measurements
This paper reports on the use of a low-cost, highly portable sonar system. The ease of use of the instrument and the short time required to make measurements should make this system valuable...
Using the SedBed Monitor to Measure Bed Load
An acoustic distance measuring device (SedBed Monitor) was developed to accurately measure bed surface transects in a sediment and water recirculating flume. From these transects the rate...
An Investigation of Turbulence in Open Channel Flow via Three-component Laser Doppler Anemometry
A three-component laser Doppler anemometer is used to reexamine the distribution of single-point mean statistics in a nearly uniform fully-developed 2D turbulent open channel flow of water...
Return to search