Bridge Design By 1-2-3
MULTBEAM, a Lotus 1-2-3 template, can be used to analyze simple-span, multigirder steel highway bridge superstructures. Since it was developed for in house use by Sverdrup Corp., this...
The Road to Drained Pavements
In California, a fast-draining base course within the pavement structure is now the preferred design. For the first time, the 1987 edition of the California Highway Design Manual recommends...
Pressure Injected Footings in Piedmont Profiles
Comparatively little has been published on the behavior of pressure injected footings in the Piedmont residual soils and weathered rocks. It is the purpose of this paper to describe some...
Design of Breakwaters for Hurricane Wave Attack
The breakwaters protecting Port of Haina in the Dominican Republic have been repeatedly damaged by hurricane storm waves. Attempt to repair the destroyed portions have been largely unsuccessful....
Construction of Fisherman's Wharf Breakwater
The San Francisco District of the United States Army Corps of Engineers recently completed construction of a breakwater at Fisherman's Wharf. The construction, completed ahead...
Integrated Monolayer Flexible Revetment Technology for Coastal Protection
Fundamental considerations for flexible revetment design are given in some detail and the critical need for sound engineering in a total system design approach is strongly emphasized....
Global Issues?Local Responsibilites
This paper discusses the concrete, day-to-day benefits of international regulations, the specific roles that local officials and interest groups play in developing successful international...
Concrete Overlays Challenge Asphalt
When a pavement needs more than minor repair but not total replacement, bonded and unbonded concrete overlays and inlays are options to consider. The article describes four projects where...
Strengthening Old Floors
The floors of the historic City Hall and Courthouse in Minneapolis had withstood 80 years of hard use before they have to be analyzed and brought up to code. The building is about 300...
Armor Protection for Rubble Mound Breakwaters
A brief summary of past practices in breakwater armor system design is presented. The limitations of current design procedures for rubble mound breakwaters are discussed and improved methods...
Plastic Concrete Cutoff Walls
The studies revealed that plastic concrete can be prepared having a coefficient of hydraulic conductivity that is less than 1 multiplied by 10** minus **7 cm/sec. The shear strength of...
Computer Aided Simulation of Fluid-Structure Interaction Problems
The papers included in this book represent state-of-the-art developments in and applications of computer aided simulation of fluid-structure interaction problems in both the terrestrial...
Guide for the Design and Use of Concrete Poles
Prepared by the Concrete Pole Task Committee of the Committee on Electrical Transmission Structures of the Structural Division of ASCE. This guide presents...
Spanning the Seas
A proposed structural scheme, called the V�tower system, could cross vast stretches of water with record length spans yet use only conventional materials. An example is a bridge proposed...
Water Jets: Concrete Yes, Tunneling Maybe
High pressure water jets are demolishing concrete from bridge and parking decks, faster and at lower cost than by traditional means. The technique is fast becoming an acceptable option....
Automating Bridge Design
To avoid some of the pitfalls of manual design calculations, Parsons Brinckerhoff Quade & Douglas engineers designing a series of bridges for a $280 million section of the New...
Case Studies?Semi-Closed Pipeline Systems
The paper discusses the title subject in terms of automated systems, flexible scheduling, and system components. Project locations include the Mahaweli Development Project, Sri Lanka;...
Case Study?Open Pipeline System, Coachella Valley Water District
A supervisory canal control system installation was started in 1966, seventeen years after start up, and a major upgrading was completed in 1983. The canal delivery system now has a central...
Stepped Spillway Design with a RCC Dam
The hydraulic model study results for the Upper Stillwater stepped spillway design are presented. The studies encompassed several spillway geometries and design unit discharges ranging...
Parametric Analysis of Concrete Gravity Dams using Finite Element Analysis
More sophisticated means of analyses have been investigated to determine the accuracy and applicability of conventional methods to a range of parameters affecting stability. This paper...
Return to search