New Concrete and Asphalt Mixes on the Horizon
Significant research is currently 'in progress' which is intended to develop modified or new design methodologies that will result in improved pavement performance....
Building Bridges the Old Way
Cast-in-place concrete bridges built on falsework, particularly post-tensioned box girders, are California's dominant structure type. Factors which have led to the popularity...
Seismic Design Criteria for Foundations on Control Piles
Control piles have been widely used in Mexico City for underpinning buildings with excessive settlements caused by the consolidation of the soft clay deposits, and as a foundation solution...
Preliminary Dynamic Analyses of the Ministry of Agriculture Building
The Ministry of Agriculture building on Avenida San Antonio Abad was originally constructed as a 17 story reinforced concrete structure using a waffle slab system with interior reinforced...
R/C Frame Drift for 1985 Mexico Earthquake
This paper contains the results of a parametric study of the displacement response of multi-story reinforced concrete frames. Nonlinear lateral displacement responses were calculated for...
Evaluation of Performance of Concrete Buildings Damaged by the September 19, 1985 Mexico Earthquake
As a part of a general evaluation of the structural behavior of buildings during the 1985 earthquake in Mexico City, a detailed study of 8 damaged concrete buildings has been performed....
Behavior of Reinforced Concrete Framing Systems
On September 19, 1985, Mexico City was hit by what is believed to have been the most damaging earthquake in its recorded history. In this report, a ground motion recorded in the severely...
Repairing and Strengthening of Reinforced Concrete Buildings Damaged in the 1985 Mexico City Earthquake
This paper describes briefly the criteria and techniques used for the repairing and strengthening of reinforced concrete buildings damaged in Mexico City during the 1985 earthquakes. It...
The Road to Drained Pavements
In California, a fast-draining base course within the pavement structure is now the preferred design. For the first time, the 1987 edition of the California Highway Design Manual recommends...
Pressure Injected Footings in Piedmont Profiles
Comparatively little has been published on the behavior of pressure injected footings in the Piedmont residual soils and weathered rocks. It is the purpose of this paper to describe some...
Design of Breakwaters for Hurricane Wave Attack
The breakwaters protecting Port of Haina in the Dominican Republic have been repeatedly damaged by hurricane storm waves. Attempt to repair the destroyed portions have been largely unsuccessful....
Construction of Fisherman's Wharf Breakwater
The San Francisco District of the United States Army Corps of Engineers recently completed construction of a breakwater at Fisherman's Wharf. The construction, completed ahead...
Integrated Monolayer Flexible Revetment Technology for Coastal Protection
Fundamental considerations for flexible revetment design are given in some detail and the critical need for sound engineering in a total system design approach is strongly emphasized....
Global Issues?Local Responsibilites
This paper discusses the concrete, day-to-day benefits of international regulations, the specific roles that local officials and interest groups play in developing successful international...
Concrete Overlays Challenge Asphalt
When a pavement needs more than minor repair but not total replacement, bonded and unbonded concrete overlays and inlays are options to consider. The article describes four projects where...
Changing Waterfront Uses on the River Clyde, Scotland: A Preliminary Survey
The River Clyde in Scotland was renowned for its shipbuilding and shipping facilities. However, dislocations combined with government policy have forced since the early 1960's...
Armor Protection for Rubble Mound Breakwaters
A brief summary of past practices in breakwater armor system design is presented. The limitations of current design procedures for rubble mound breakwaters are discussed and improved methods...
Plastic Concrete Cutoff Walls
The studies revealed that plastic concrete can be prepared having a coefficient of hydraulic conductivity that is less than 1 multiplied by 10** minus **7 cm/sec. The shear strength of...
Computer Aided Simulation of Fluid-Structure Interaction Problems
The papers included in this book represent state-of-the-art developments in and applications of computer aided simulation of fluid-structure interaction problems in both the terrestrial...
Guide for the Design and Use of Concrete Poles
Prepared by the Concrete Pole Task Committee of the Committee on Electrical Transmission Structures of the Structural Division of ASCE. This guide presents...
Return to search