Effect of Air Gap on Platform Reliability
A simplified reliability study of the effect of lateral wave forces impacting the deck of a fixed platform is presented. The reliability of the deck legs, considered the primary resistance...
Towards a Better Simulation of Sea States for Modelling of Coastal Structures
In the last fifteen years, techniques of wave generation have advanced to such an extent that it is now possible to exercise controls of parameters such as wave grouping, wave asymmetries,...
Reef Breakwater Response to Wave Attack
A method of predicting stability of a class of low-crested rubble mounds referred to as reef breakwaters is presented. Findings are based on a study which included an extensive series...
Rock Armouring to Unconventional Breakwaters: The Design Implications for Rock Durability
This paper identifies the need for quantitative durability testing of rock for use on dynamically stable rock armored slopes. The derivation and use of a suite of engineering tests for...
Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....
Hydraulic Performance of Berm Breakwaters
In recent years, the concept of unconventional rubble mound breakwaters, i.e berm breakwaters, has gained much attention among researchers and engineers as an economical method to build...
Application of Computational Model on Berm Breakwater Design
The development of a computational model on dynamic stability is summarized. The model is able to predict profiles of slopes with an arbitrary shape under varying wave conditions. The...
Performance of a Berm Roundhead in the St. George Breakwater System
A new harbor under construction on St. George Island in Alaska's Bering Sea is using the berm breakwater concept for protection from wave attack. Three breakwaters are included...
Berm Type Armor Protection for a Runway Extension at Unalaska, Alaska
A proposed runway extension located on the Aleutian islands was designed to withstand forces of Bering Sea storm generated waves using a unique armor protection concept. The proposed runway...
Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...
Seismic Counter-Measures for Buried Pipelines
This paper deals with the seismic counter-measures for mitigating hazards from earthquake damages to buried water and sewer pipelines. To achieve an overall program for the earthquake...
Arctic Coastal Processes and Slope Protection Design
Cold regions present special challenges for civil engineers. The papers in this book address arctic coastal processes and slope protection design. The first part of the book focuses on...
Riprap Design by Modified Safety Factor Method
The Safety Factor method for designing riprap is based upon straight forward physics combining rock properties and flow characteristics. M.A. Stevens developed the method by summing the...
Interfacial Instabilities Associated with Density Currents
Three-dimensional behavior of density currents flowing down a sloping surface has been analytically and experimentally investigated. Attention has been given to the presence of interfacial...
Overview o New England Coastal Flood Study Methodology
This paper presents an overview of the development of methologies used to determine the probabilistic flood levels for New England coastal flood insurance studies. The Federal Insurance...
Kinematics and Dynamics of Overland Flow
C. Y. Guo combined the kinematic wave approximation with Horton's infiltration formula to analytically solve the propagation of a two-dimensional overland flow on a previous...
Model-Prototype Study of Overland Flow
Similarity of overland flow hydrographs was investigated. Similarity ratios based on Froude number modeling were tested by using: 1) computed hydrographs by kinematic wave equations, 2)...
One-Dimensional Modeling of Dam-Break Flow
R.W. MacCormack method is used for the numerical integration of Saint Venant equations to simulate the propagation of one-dimensional dam-break wave. The computed water levels are compared...
Hydrodynamic Response of an Estuary to Storm Forcing
Previous work on the response/sensitivity of an estuarine hydrodynamic model to the choice of model parameters is extended to include a preliminary consideration of wind-generated waves....
Mathematical Model of Wave Induced Pressures
A two-dimensional, implicit finite difference model was built to compute surface wave induced pressures under a gravity base foundation. The results showed considerable wave attenuation...
Return to search