Critical Shear Stress of Armour Coat
The problem of the determination of the critical shear stress of the armour coat is important in sediment transport, river degradation and aggradation and flow discharge regulation. The...
Integral Length Scale in Sediment-Suspending Flow
The Clauser integral length scale is an adequate scaling parameter for velocity defect profiles in clearwater and sediment-suspending flows in open channels. Velocity defect profiles plotted...
Near Bed Sediment Concentration as Influenced by Turbulence
Suspended sediment concentration profiles are developed based on the conservation of mass and conservation of momentum equations of sediment laden flows. The resulting concentration profile...
Modeling Erosion and Deposition Due to Suction and Jet Flows
PHOENICS, a commercial 3-D computational fluid dynamics software package, was modified for simulating seabed erosion and deposition. Time varying sediment fluidization, transport and deposition...
Energy Relations for Suspended Sediment Transport
One of the main difficulties in predicting transport rates of suspended sediment on the basis of the Rouse-expression for relative sediment concentrations, is the lack of any reliable...
Sediment?Hyperconcentration Flow and Its Similarity Laws
The sediment- hyperconcentration flow are studied theoretically and experimentally, and the formulas for the Bingham shear stress, rigidity coefficient, fall velocity and transport capacity...
The Effects of Velocity on Scour
Four effects of 'velocity' on scour are discussed: clear-water scour, scour by light sediment-transporting flow, mode of movement, and kinetic terms included...
Prediction of Time Development of Local Scour
The prediction of the time development of local scour is commonly solved by means of model tests. A brief description of the time-scale and the relation between the time and the scour...
Field Measurement of Topography at a River Mouth
The authors have been measuring topography and cross section at the river mouth of the Nanakita River, in Japan. Changes of short-time scale, such as straightening of the river channel...
Hyperconcentrations, Mud and Debris Flows?A Summary
Brief descriptions of the properties of mud and debris flow and hyperconcentrated stream flow materials and their importance to the descriptions and modeling of these flows are presented....
Flow Modeling in the Toutle River, Washington
In support of flow, suspended load, bed load, and bedform transport measurements, a quasi-three-dimensional river flow model was adapted to a reach extending from 260m upstream to 30m...
Mechanics of Mud Flows in Curved Channels with Uneven Beds
Most natural debris flows move through paths that are curved and that have significant bed topography. Owing to the dependence of the mechanics of wet debris containing substantial amounts...
Comparison of Models for Single-thread Streams
A variety of two- and three-dimensional models for flow in curved channels and rivers have recently been made available for engineering use, and the question arises as to how sophisticated...
Goodwin Creek Channel Morphology and Stability
Selected cross sections along Goodwin Creek channel, northern Mississippi, have been surveyed a total of twenty-one times since 1977 to document channel adjustments. Initial results of...
Convolution-Integral Modeling of Non-Equilibrium Sediment Transport
In transient process of sediment transport due to unsteady or/and nonuniform flow or discontinuity of boundary condition, non-equilibrium process appears and it sometimes plays an important...
Two Dimensional Nonequilibrium Transport of Nonuniform Sediment
Mathematical models based on diffusion and/or diffusion convection equations have been widely applied to study sediment transport in suspension. Some of the studies were reported by C.C....
Alluvial Stream Bank Erosion?A 10-Year Study
Results of investigations of bank erosion along alluvial streams between 1977 and 1989 are given. Natural processes were found to dominate, with piping an important but hitherto unrecognized...
Low-Waterway and Bank Erosion in a River With Alternating Bars Bed
In a river with alternating bars bed, the banks are often subjected to erosion due to the convergent flow resulted from the bed geometry, even in a straight channel. It is known empirically...
Exceedance of Allowable Velocity in Bank Stability
The authors have developed a method to account for flow duration in the application of the allowable velocity method through comparison with observed bank instabilities on a river system....
Sediment Transport Due to Channel Flushing
Blocking of rivers and canals by sediment due to landslides or dumping of waste create problems of upstream flooding and drainage. Experiments are carried out in the present study on flushing...
Return to search