Creep Rate Analysis of Pile Load Test Data
The uniform creep behavior of five driven piles and one slurried pile based on pile load test data are presented and analyzed. The incremental static load tests carried out by ARCO, Alaska...
A Hybrid Structural Ice Defense Mechanism
A hybrid plate composed of steel outer surfaces and a concrete core has characteristics that make it desirable for use on offshore structures in ice prone environments. The service and...
Multi-Truss Design for Tower
A modified structural steel system of outrigger trusses and belt trusses bolster the 54-story Equitable Tower West. Located in New York City, the building's structural system...
Computer-Aided Studies of Complex Soil Moduli
Low-cost microcomputers and new electronic components make it possible to measure accurately the phase and amplitude of mechanical waves in the frequency domain at a small fraction of...
Creep of a Strip Footing on Ice-Rich Permafrost
Creep settlement tests were performed on a strip footing founded on the surface of ice-rich aeolian silt permafrost. The tests consisted of applying four step loadings to a 10 in. (25....
Snow Effects on Pile Design Temperatures
The construction of North Slope aboveground pipelines and gathering lines is generally from snow workpads constructed proximate to existing access roadways. The pile support centerline...
Predicted and Measured Performance of a Foundation
The predicted and measured short term foundation behavior of a 28 story building in downtown San Antonio, Texas is reported. The soil is a stiff to hard clay and clay shale. The design...
Geotechnical Behavior of Underreams in Pleistocene Clay
Enlarged bases are often constructed in cylindrical drilled-and-cast-in-situ foundation elements (footings, bored piles) to increase their capacity. Enlarged bases that are cut mechanically...
Cover Allocation in Rangeland Watershed Management (A Review)
The importance of cover on rangelands has been recognized for many years. This paper reviews the importance of cover in terms of infiltration and erosion and provides management recommendations...
Simulation of Hillslope Hydrologic Response to Snowmelt in Southwestern Idaho
A two-dimensional, variably saturated porous media flow model was applied to vertical hillslope cross section on a first order study basin in southwestern Idaho. The dominant source of...
Interrelating Infiltration Measurements
Field measurements of infiltration rates are frequently used to index environmental conditions, soil hydrology, and the potential for rainstorm response. However, the variety of methods...
Characterization of Variable Soil-Water Properties
Hydraulic conductivity, water retention, soil bulk density, and clay content were analyzed on undisturbed soil cores obtained from different depths at sixteen locations in a 24 acre watershed....
Prediction of Soil Water Properties for Hydrologic Modeling
Water flow in soils can be characterized for many boundary and initial conditions by solving governing differential equations. Thus, a physically consistent means of quantifying water...
A Systematic Evaluation of Hillslope Subsurface Flow: The Effects of Slope Angle and Soil Parameter Variation
A two-dimensional finite element variably saturated flow model is used in conjunction with an automatic mesh generating scheme to simulate hillslope subsurface flow. Slopes from 2% to...
Embankment Seepage Control Design and Construction
For seepage control features of embankment dams, design criteria and construction practice is reviewed as it is reflected in the experience of the U. S. Army Corps of Engineers. The generally...
Designing and Monitoring for Seepage at Calamus Dam
Given the complex, pervious nature of the foundation for Calamus Dam, every effort has been made to incorporate design features that will reduce and control the anticipated large volumes...
Seepage in the Unsaturated Zone: A Review
This paper briefly reviews the procedures whereby the seepage rate, depth of penetration of nonreactive pollutants, and the depth of the wetting front can be calculated when the assumption...
Seepage Control for Embankment Dams USBR Practice
The current Bureau of Reclamation approach to seepage assessment, analysis, and design for embankment dams is described. The advantages and appropriate applications for the analysis programs...
Grout Penetrability
The ability of a grout to penetrate a formation is always a selection requirement for projects in which fracturing is undesirable. The major grout properties affecting penetrability are...
Some Aspects of Analysis and Prediction of Subsidence
A procedure based on the nonlinear finite element analysis was investigated for the prediction of subsidence caused by longwall mining. This paper presents a case study involving predictions...
Return to search