ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Bed Load Roughness in Supercritical Flow
A supercritical concrete channel is proposed for Mission Creek located in Santa Barbara County, California. The proposed channel may transport gravels and cobbles as bed load during large...

Riprap Design Criteria for the ARS Low Drop Structure
The ARS low drop grade control structure has proven to be an effective means to stabilize incised channels in Mississippi. However, field inspections and laboratory testing have indicated...

New Lessons About the Hydraulic Performance of Highway Storm Sewer Inlets
Laboratory experiments were performed with highway storm water curb inlets to 1) reduce the oblique standing wave that extends into the highway from the downstream side of the inlet and...

Stepped Spillway Design for Flow Over Embankments
Many embankment dams have been identified as unable to pass their design flows without failure due to overtopping. The U.S. Bureau of Reclamation (Reclamation) is currently at the forefront...

Overtopping Flow Spillway for Baldhill Dam, Sheyenne River, North Dakota
An existing gated spillway structure for Baldhill Dam and Reservoir (Lake Ashtabula, North Dakota) is not capable of passing floods up to the probable maximum flood (PMF) without overtopping...

Fluidization Pipe Hole Spacing
Two-dimensional fluidization experiments are performed on fine (d₅₀ = 0.15 mm) and medium coarse (d₅₀ = 0.45...

Design of Groins on the Middle Rio Grande
The Albuquerque Projects Office of the Bureau of Reclamation wanted to use groins in place of revetments at two sites on the Rio Grande. The Bureau of Reclamation has limited experience...

Preventing Stilling Basin Abrasion
A 1:10 scale physical hydraulic model of Taylor Draw Dam outlet works was used to develop modifications to prevent back flow intake of rock into the stilling basin. Much of the back flow...

Hydraulic Features of Flexible Curtains Used for Selective Withdrawal
Flexible curtain barriers are being investigated as a way to modify power penstock intakes to achieve selective withdrawal. The curtain barrier controls the elevation from which water...

Modeling and Field Experiments for Tracer Gas Tests
Numerical modeling and field experiments were used to extend the tracer gas technique for determining surface gas transfer rates to shallow bays. Two-dimensional modeling was used to investigate...

Experimental Difficulties Encountered in Testing Air/Water Mixtures
The Tennessee Valley Authority and Voith Hydro, Inc., are conducting a joint research project to study the effects of air admission on hydraulic turbines. Francis turbine models, homologous...

Modeling of Wetland Hydrodynamics and Transport in Coastal Louisiana
Modeling of hydraulics and transport of large wetland systems poses critical decisions between resolution of the complex geometry of a wetland and the testing required to meet study goals....

The Design of Scour-Safe Bridges
Two new highway systems, the East Papago and the Pima freeways, are currently under design and construction within the Phoenix, Arizona, metropolitan area. Both of these highways will...

Appropriate Technology in Infrastructure Development and Management
Infrastructure management principles apply to appropriate technologies used for hydraulic structures. However, some of the principles are more culturally sensitive than others, mainly...

Appropriate Technology in Hydraulic Engineering
Appropriate, and successful, technology transfer is contingent upon the simple dictum: technology transfer is context dependent and context specific. Optimum success in the transfer of...

Energy Losses Due to Air Admission in Hydroturbines
Admission of air at the exit of a hydroturbine runner is an attractive technique for raising dissolved oxygen levels downstream of a hydro plant. The air admission, however, is generally...

The Role of Computational Fluid Dynamics in Hydroturbine Analysis
Prospects of developing comprehensive methods of computational fluid dynamics for the analysis and design of new generation of hydroturbines are considered. Unique requirements for this...

Efficiency and Cavitation Effects of Hydroturbine Venting
Volkart and Bohac et al. have summarized much of the past work on aeration of hydroturbine releases to improve downstream water quality. Conventional alternatives for increasing dissolved...

Design of High Capacity Spillways for Ritschard Dam, Colorado
A hydraulic model investigation was conducted by the Bureau of Reclamation to assist in designing the hydraulic structures associated with Ritschard Dam. Ritschard Dam will have a labyrinth...

Flood Control Design for Development on Alluvial Fans
Hydrology, debris production, sediment transport and hydraulic studies were conducted to provide flood control for a development within an alluvial fan floodplain. Innovative techniques...

 

 

 

 

Return to search