Bed Waves Generated by Internal Waves in Alluvial Channels
The flow in an alluvial channel is conceived as a stratified flow both with respect to the velocity- and density-distribution. In such flows internal waves may occur which influence the...
Comparison of
Manning's n values were determined for three stream channels in two complex watersheds in North Mississippi. The study covered a wide range of channel conditions and flow...
Modelling Changes in Coastal Morphology
A description is given of a newly-developed coastal sediment transport model. Features of the model are the inclusion of cross-shore transport and non-potential suspended load, the latter...
A Continuum Mechanics Approach to Loose-Bed Motion
A mathematical model is presented for simulation of loose-bed motion. The physical system is separated into two regions, a bottom region and an upper region. The bottom region is representative...
Instability of Bed-Surface Composition Due to Sorting Process in a Stream Composed of Sand and Gravel
Wavy patterns of sorting are often observed in a stream composed of sand and gravel, and they are regarded as instability of bed-surface composition due to selective bed-load transport...
Highly Concentrated Sediment Loads of the Yellow River
A set of high concentration data for the Yellow River in China is examined and compared with low concentration data and laboratory experimental results....
Convolution-Integral Modeling of Non-Equilibrium Sediment Transport
In transient process of sediment transport due to unsteady or/and nonuniform flow or discontinuity of boundary condition, non-equilibrium process appears and it sometimes plays an important...
On the Coexistence of Bedload and Suspended Transport for a Uniform Grainsize Material
A sensitivity analysis and an experimental verification have been made to assess the validity of the equations that describe the sediment transport in non-equilibrium conditions, when...
Sediment Transport Rate for Non-uniform Sand
Based on the equations of bedload transport by authors, the functional relation of total sediment transport capacity of flow has been found. The modifying coefficient due to non-uniformity...
Laboratory Analysis of Hyperconcentrations
The physical and kinematic behavior of hyperconcentrations has been reviewed and a summary of recent and past developments in hyperconcentrated flow research is presented. This paper focuses...
Total Sediment Load Calculations for Goodwin Creek
Total sediment transport load of Goodwin Creek was calculated for the period from 10/1/84 to 9/30/88 using transport relations derived from sample data for the fines (< 0.06 mm),...
Estimation of Unsampled Sediment Discharge
A procedure is developed to estimate the total bed material load without using the size distribution of suspended load. Because of the uncertainties involved in the calculation of the...
A Watershed Model of Sediment Transport?Load-I
A watershed sediment transport model has been formulated and optimized upon storm hydrographs and the associated sediment load data for several watersheds that have been urbanized and...
A Stochastic Approach to Sediment Transport in Alluvial Rivers
A dimensionless sediment transport function relation for alluvial rivers has been developed using stochastic approach. The dimensionless function may be applied to estimate suspended load,...
Effects of Climate Change on Watershed Runoff
This paper examines forecasts of changes in watershed runoff in the Delaware River basin that result from a range of predicted effects of increased atmospheric carbon dioxide (CO2)...
Seven Oaks Dam Outlet Works Design
The U.S. Army Corps of Engineers has completed the preliminary design of the outlet works for the proposed Seven Oaks Dam. The dam is the upstream-most feature of the Corps'...
A
A two-component turbulence model is introduced for depth-average flow calculations in shallow open-channel flows. This model treats the bed-generated turbulence as a background component,...
Fixed-Wheel Gates Uses and Limitations
The fixed-wheel type of gate, which derives its name from sets of wheels mounted on axles fixed to the gate, rolls upon and transmits the hydraulic load of the gate to guide tracks bearing...
Determining Hydro Project Dependable Capacity
Traditional techniques for estimating a hydro project's dependable capacity are of limited value when evaluating a hydro project in a thermal-based power system. For such...
Quantifying Uncertainty in Hydropower Planning
Power system operators must deal with various types of uncertainties. Some are related to inputs, such as system load and water supply, while others pertain to the system itself, such...
Return to search