Preliminary Validation of the MAC3D Numerical Flow Model
MAC3D is a recently developed numerical model for three-dimensional incompressible flow. Model predictions are compared with physical test data for a curved open channel and a multi-level...
3D Flow Structures?From Laboratory to Field Applications
One laboratory experiment and one field application have been modeled. For each one different sources of errors in the model results could be detected. It may be concluded that the applicability...
Verification of a 3D Flow Model Using Laboratory Data
The ASCE Task Sub-Committee on 3D Free Surface Flow Model Veri fications has been developing test cases and/or procedures for both computational model developers and users over the past...
Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Developing a Rating Table for the Central Diversion Dam Radial Gates
The Central Nebraska Public Power and Irrigation District uses radial gates for flow control throughout its system. The rating tables for five radial gates on a diversion dam are in error,...
Discharge Characteristics of Overshot Gates
Overshot gates are becoming increasingly popular for controlling water levels in open channels because of the ability of the gates to handle flow surges with limited depth changes. While...
Field Determination of Flow through a Pressure Regulating Valve
This paper presents a computer methodology to calculate flow through a pressure regulating valve for different opening percentages and a given pressure differential. The methodology is...
Waste of Water Is Costly. Why Not Use an Accurate Flow Monitoring System?
Water becomes more and more a precious good. Therefore the exact measurement of flow of water, the management of water and process control in connection with water will become more and...
The Effects of Water Surface Profiles on Manning's Roughness Coefficient
The Manning Equation has wide application in engineering practice. Nonetheless, certain aspects of it are still not widely understood. Often, engineers deduce the value of Manning's...
Evaluating Hydraulic Roughness in Tunnels
Much of the data presented in the literature on measured friction losses in tunnels are given in terms of the Darcy-Weisbach
Synchronized Measurements of Bed-Shear Stress and Flow Velocity in Open Channels with Simulated Vegetation
Synchronized measurements of shear stresses at the bed and velocities both within and above a simulated plant canopy in an open-channel flow are presented. Traditional (hot-film sensors)...
A New Technique for Measuring Vegetation Density
Detennination of the discharge capacity of a vegetated channel or floodplain requires a reasonable estimate of a flow resistance coefficient; such as Manning'
Wetland Designs for Environmental Protection?Application in India
In many developing countries raw sewage are discharged into rivers and lakes. This practice causes severe degradation of regional water quality, and often results in serious public health...
Direct Measurement of Turbulence Structures in a Standard Jar Test Tank Using PIV System
Particle image velocimetry (PIV) is applied to the measurement of instantaneous two-dimensional velocity fields in a standard 2-liter jar test tank for several different impeller speeds....
Vegetation-Induced Drag: An Experimental Study
Open-channel flow models through vegetative canopies require a quantitative measure of the ability of plants to absorb momentum by form drag, which is commonly characterized in terms of...
On Silt Abrasion Erosion of Three Gorges Hydraulic Turbine in the Future
In this paper the basic parameters of Three Gorges hydraulic turbine have been reviewed and the operation characteristics of Three Gorges hydropower Station pointed out. Combined with...
The Influence of Peak-Regulation of the Three Gorges Power Plant on Navigation
The paper studies the unsteady flow resulted from peak-regulation by daily regulation at both Three Gorges and Gezhouba Power Plants and concludes that the river section between the dam...
Capillary Pressure-Saturation Relationships in Fracture
Understanding and quantifying unsaturated flow through fractures in rocky slope is important for design and construction of drainage system in large-scale hydraulic engineering. The data...
Observations of Tidal Circulation in Mamala Bay, Hawaii
A comprehensive measurement program, designed to study circulation processes and support hydrodynamic modeling, has been carried out in Mamala Bay on the south coast of the Island of Oahu,...
Assessment of Risks of Flooding by Use of a Two-Dimensional Model
In case of rare floods, the rivers might go far away from their minor bed, submerging large areas, eventually with relatively high velocities. One-dimensional models are not suitable to...
Return to search