Challenges in Drinking Water Distribution Systems Security Modeling
This paper is on challenges in drinking water distribution systems security modeling connected to OCMS, addressing research and practical issues coming-out from two recent activities which...

Structures Congress 2007
The Congress' technical program was designed with the practicing structural engineer in mind while maintaining a rigorous standard for the academic presentations. Topics include:...

Introduction
Permafrost is defined as soil that remains frozen for more than two years. At elevations less than 304.8 m (1000 ft.), it is frequently encountered north of latitude 60. It may also be...

The Need for Geotechnical Investigation
Knowledge of the subsurface conditions is needed to decide which type of foundation to use. In the discontinuous permafrost zone, some generalizations may be made about the location of...

Structurally Enhanced Foundations: A Functional Solution to Thaw Strain in Frozen Sand and Gravel
Some building sites with perennially frozen soil profiles are developed using nonelevated, conventional-appearing foundation systems. These sites consist of frozen sands and gravels and...

Post and Pad
As the name implies, this type of foundation consists of a concrete or wood pad placed on or buried in the ground. It is the lowest priced option for buildings on frozen silt, which may...

Adjustable Foundation Design Development Innovations in Arctic Engineering
The purpose of adjustable foundation systems is to accommodate a wide variety of soils, including those which have low bearing capacity or which may be subject to settlement and/or horizontal...

Some Case Histories of Pile Foundations in Permafrost
Foundations for permafrost conditions should conform to one of three basic design principles: keep it frozen, let it thaw, or thaw the ground before construction. To keep the permafrost...

Refrigerated Foundations
Refrigeration systems used to cool foundations on frozen ground can be classified as either active or passive, depending on whether external energy is used to power the systems. If pumps,...

Hurricane Protection System
This chapter discusses hurricane protection systems. Topics include standard project hurricane, levees and floodwalls, datums and elevations, and interior drainage and pump stations....

Direct Causes of the Catastrophe
This chapter examines direct physical causes of the hurricane protection system failures, including soil strength assessments and pumping station limitations....

Contributing Factors
This chapter examines contributing factors of the hurricane protection system failures, including the underappreciated risk to New Orleans, a piecemeal implementation of the hurricane...

Strong Diagonals
Exterior Diagonal Systems that carry both gravity and lateral loads in building structures � known as exodiagonals or diagrids � are increasingly being used worldwide to provide freedom...

Structural Steel Designer's Handbook
AISC, AASHTO, AISI, ASTM, AREMA, and ASCE-07 Design Standards
Mirroring the latest developments in materials, methods, codes, and standards in building and bridge design, this is a one-of-a-kind, definitive reference for engineers. Chapters include:...

Structural Condition Assessment
In Structural Condition Assessment, editor-in-chief Robert Ratay gathers together the leading people in the field to produce the first unified resource on all aspects of structural condition...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Structures Congress 2006
Structural Engineering and Public Safety
Structures Congress 2006 highlights research in the broad areas of applied structural analysis, optimal structural design, structural control,...

Geo-Frontiers 2005
These Proceedings showcase recent advancements in all facets of the geo-industry. Geo-Frontiers was conceived to present the frontier of civil, geotechnical, and geoenvironmental engineering....

Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...

Structural Safety and Its Quality Assurance
Sponsored by Committee 9A/10 of the Council on Tall Buildings and Urban Habitat of the Structural Engineering Institute of ASCE. This report uses an...

 

 

 

 

Return to search