Real-Time Data Collection of Scour at Bridges
The record flood on the Mississippi River during the summer of 1993 provided a rare opportunity to collect data on scour of the streambed at bridges and to test data collection equipment...
Calibration of Movable Bed Model for Armant Area
The morphology of the Nile River, in Egypt, is undergoing continuous changes which causes navigation bottle-necks in some local reaches. About 200 km downstream Aswan, at Armant area,...
Estimation of Mean Velocity for Flow Under Ice Cover
Methods of estimating mean velocity in a vertical from point velocity measurements are compared for an ice-covered channel. The comparison is based on velocity profiles obtained from a...
Recent Applications of Acoustic Doppler Current Profilers
A Broadband acoustic Doppler current profiler (BB-ADCP) is a new instrument being used by the U.S. Geological Survey (USGS) to measure stream discharge and velocities, and bathymetry....
Experimental Study on Unsteady Flow in Open Channels with Flood Plains
Hydraulic characteristics of unsteady flows were investigated experimentally in open channels with flood plains using a computer-controlled water supply system. Some noticeable features...
Instrumentation Needs and Possibilities: A Dialogue Between Suppliers and Users
The present symposium includes a panel discussion to address and illuminate needs and possibilities in hydraulic instrumentation. The panel discussion is organized with the intent of promoting...
Practical Method for Calculating Contraction Scour
Total scour at bridge crossing waterways consists of long-term aggradation or degradation of the streambed, contraction scour and local scour at the piers and abutments. This paper will...
Impacts of Low Flows on the Alluvial Rivers of the Southwest Region of Bangladesh
The Ganges River, which flows out of China through Nepal and India and finally into Bangladesh, has been subjected to continuous scrutiny as conflicts regarding the diversion of water...
GIS-Based Channel Extraction and Smoothing Algorithm for Distributed Hydrologic Modeling
An algorithm is developed to extract dendritic channel networks from Digital Elevation Model (DEM) data. This algorithm, in conjunction with the GRASS Geographic Information System (GIS),...
Combination of an Automated Channel Network Extracting System and a Distributed Watershed Model in Estimation Rainfall-Runoff Processes
Due to the improvement of accuracy and availability of Digital Elevation Models (DEMs), hydrologic researches which utilize DEMs have gradually reached sound results. In this paper, we...
Revised Hydraulic Design of the Rio Hondo Flood Control Channel
The US Army Engineer District, Los Angeles has completed a major review study of the Los Angeles County Drainage Area (US Army, 1992) and has determined that the existing flood control...
Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...
Mixing of Thermal Discharges at Low Froude Numbers
A study was performed to develop an optimum configuration for the discharge canal of a cooling lake. The objective was to minimize the initial mixing at the end of the discharge canal,...
Unsteady Spillway Inlet Conditions at the Weatherford Water Supply Reservoir
The Weatherford Water Supply Reservoir, in Weatherford, Texas has had frequent lake-side flooding and has experienced unstable spillway operation. Residents complained that the water had...
The Miller City Levee Break and Incipient Meander Cutoff
On July 15, 1993, the flooding Mississippi River broke through a levee near Miller City, Ill., at the head of the Mississippi Embayment, approximately 55 km upstream from Cairo, Ill. Flow...
Problems with Indirect Determinations of Peak Streamflows in Steep, Desert Stream Channels
Many peak streamflow values used in flood analyses for desert areas are derived using the Manning equation. Data used in the equation are collected after the flow has subsided, and peak...
Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...
Roughness Coefficients for High-Gradient Channels in New York State
Manning's roughness coefficients (n values) were computed for a range of flows at six streams in New York State (USA) that have high energy gradients (greater than 0.002) and large median...
Supercritical Flows Versus Subcritical Flows in Natural Channels
Many analysts model large discharges and/or high-gradient reaches as supercritical flow. While this assumption may be valid for man-made channels of smooth, non erosive materials, and...
Erosion and Deposition by Debris Flows in Mountainous Channels on North Fork Mountain, Eastern West Virginia
A study of four debris-flow impacted channels in the North Fork Mountain area of eastern West Virginia shows that the geomorphic effect of debris flows on channel morphology is variable...
Return to search