Wave Boundary Layer Above the Submerged Coastal Slope
A calculation method of parameters of turbulent boundary layer formed by waves is proposed. A calculation of boundary layer on a rough slope with inclination typical for steep Caucasian...
Friction Factors in Coastal Flooding
As the world's coastal zones are being developed and the coastal population increases, coastal flooding, or rather the prediction of its extent and frequency of occurrence, becomes a more...
Anisotropic Effects on Flow from a Recirculation Well
We examined flow in an unconfined aquifer near a recirculation well, which consists of a source and a sink of equal strength, with emphasis on understanding the effects of anisotropy....
An Optimal Parameter Estimation Model for Groundwater Resource Management
An optimal parameter estimation model is developed to identify the locations of wells, to determine pumping magnitude, and to calculate transmissivity coefficients in a confined aquifer...
A Model of Mixing in a Stratified Tidal Flow
We will describe a simple model of vertical mixing in a stratified tidal flow that might be observed in shallow estuary like San Francisco Bay. The model flow is driven by a specified...
Density Currents in Pollutant Transport and Mixing
A buoyant spreading model for the current-advected plume is formulated including several distinct mechanisms: convective spreading, interfacial friction spreading, entrainment at the density...
Computation of Flow Past a Cylinder Mounted on a Flat Plate
The surface shear stress distribution in the vicinity of a circular cylinder - mounted normal to a rigid flat plate - produced by the three-dimensional flow past it, is investigated numerically...
A Model for Vertical Transport at a Sheared Density Interface
A physically based model for vertical mixing and transport at a sheared density interface is presented, based on high-resolution measurements from laboratory experiments. It is found that...
An Experimental Study of Bivalve Siphonal Jets in a Turbulent Boundary Layer Crossflow
We conducted experiments in a laboratory flume to study the interaction of bivalve siphonal jets with the turbulent boundary layer which forms in the benthic region of shallow estuaries....
Selective Withdrawal in a Rotating Stratified Fluid
In this paper we consider the axisymmetric flow of a rotating stratified fluid into a point sink. Linear analysis of the initial value problem of flow of a linearly stratified fluid into...
Fractal Dimension of Aggregated Sediments
Cohesive sediment dynamics in estuarine systems are strongly affected by particle aggregation and flocculation. These processes are mainly controlled by the Brownian motion, flow turbulence...
Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...
Flow Resistance Properties of Flexible Linings
Flow resistance for flexible channel linings is a function of the relative roughness of the lining in accordance with boundary-layer principles. As with vegetation, flexible linings have...
Rheometry of Natural Sediment Slurries
Recent experimental analyses of natural sediment slurries yield diverse results yet exhibit broad commonality of rheological responses under a range of conditions and shear rates. Results...
Bed Shear Stress in Unsteady Open-Channel Flows
In this study, velocity distributions over smooth and rough beds were accurately measured with an LDA in unsteady open-channel flows. The log-law distributions yielded well in the wall...
Limitations of Reduced Scale Testing on Parshall Flumes
A model for the boundary layer development in the entrance section of a Parshall flume is developed to account for the effects of fluid viscosity on flume calibration equations. Data for...
Riprap Design at Bridges?Factor of Safety Approach
The factor of safety method offers a physically based methodology for design of riprap that relates the applied shear stress on the channel boundary to the stability of the riprap layer....
Riprap Incipient Motion and Shields' Parameter
Unobstructed incipient motion data from a variety of sources are compiled to re-examine current thinking regarding riprap stability. Shields' framework is investigated and relationships...
Turbulent Velocity Flutuations in Natural Rivers
The longitudinal and transverse components of flow velocity, as well as the normal and tangential stresses, must be expected to fluctuate with time and space when flow at a high Reynolds...
New Canadian Provisions Related to the Design of Composite Beams
In this paper, the new provisions in CAN/CSA-S16.1-M89 for the design of composite beams, together with reasons for changes, are discussed. Some of the new provisions reflect results of...
Return to search