ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Seismic Retrofit of Building Structures with Unreinforced Masonry Infill Walls
The paper summarizes the result of an analytical study conducted by the authors concerning the evaluation of the seismic performance of buildings with unreinforced masonry infills. The...

Earthquake Strengthening of a Twelve Story Non-Ductile Concrete Frame Building with Unreinforced Masonry Using Displacement Control Criterion
The structural concern with the Cooper Arms Apartment building when subjected to ground shaking was the in-plane and out-of-plane forces on the infill and consequences of the infill resisting...

Report and Summary of ATC-31?Evaluation of the Performance of Seismically Retrofitted Buildings
Structural and damage data for seismically retrofitted buildings affected by the October 1, 1987 Whittier Narrows and October 17, 1989 Loma Prieta, California earthquakes were collected...

Dynamic Field Response Studies and Earthauqke Instrumentation of the Meloland Road Overcrossing
Ambient vibration data was obtained at the Meloland Road Overcrossing near El Centro in California by The California Department of Transportation (CALTRANS) as part of a 1978 Federal Highway...

Dynamic Soil-Foundation Interaction at the Meloland Road Overcrossing
Forced vibration tests, using a hydraulic ram device, were conducted on the Meloland Road Overcrossing (MRO) bridge over Interstate 8 near El Centro, California. Dynamic response data...

Seismic Analysis of Meloland Road Overcrossing Using Calibrated Structural and Foundation Models
A detailed seismic analysis of the Meloland Road Overcrossing is being implemented to study the response of this bridge during the 1979 Imperial Valley Earthquake. This analysis is based...

Ductility Analysis for Seismic Retrofit of Multi-Column Bridge Structures, Santa Monica Viaduct
A new procedure is being developed for the ductility analysis of multi-column bridges. The formation of the plastic hinges in the structure (columns and/or superstructure) is followed...

Lifeline Structure Design Issues?A Case Study of Current Bridge Seismic Design and Application of Recent Seismic Design Research
The purpose of this paper is to present the major design issues addressed in the design of Terminal Separation (Replace) and I-880 Reconstruction. To address these issues Caltrans set...

San Francisco Bayshore Viaduct Seismic Retrofit
The Bayshore Freeway viaduct is located in the city of San Francisco and serves as a vital transportation link between the Bay Bridge and points south along Highway 101. This structure...

Link Length Design and EBF Seismic Performance
Twenty eccentrically braced frames (EBFs) are designed using the current seismic design code and newly developed step-by-step design procedure. The EBFs have a variety of link lengths...

Seismic Behavior of Weak-Column Strong-Beam Frames
An experimental evaluation of the seismic performance of moment-resisting steel frames using Weak-Column Strong-Beam joints is described. A simulated seismic response is imposed on five...

Cyclic Behavior and Seismic Design of Steel Base Plates
The objectives of this study were to conduct realistic experiments to understand cyclic behavior of steel column base plates and to develop seismic design recommendations. Six specimens...

A Comparison of the Cyclic Performance of Bolted and Riveted Connections
As part of a larger project to investigate the performance of older steel frames, a comparative study of bolted and riveted T-stub connections was conducted. The study included connections...

Some Unresolved Issues in Seismic Steel Codes
In the latest revisions of the three major U.S. seismic codes (AISC, NEHRP, UBC) some requirements can be questioned because of limited knowledge. Confining attention to conventional kinds...

Seismic Standards for Existing Federally Owned and Leased Buildings
Public Law 101-614 requires the Interagency Committee on Seismic Safety in construction to develop 'standards for assessing and enhancing the seismic safety of existing buildings constructed...

Nonlinear Response of SDOF Systems to Intraplate Earthquakes
It is well established that there are characteristics differences between intraplate and interplate earthquakes. A parametric study of SDOF systems indicates that there is also consistent...

Connectors for Earthquake Resistant Structures
Damage assessments from the past several earthquakes located on the northern, central and southern zones of the San Andreas Fault - Cape Mendocino: April 1992, 7.1; Loma Prieta: October...

The European Approach to Seismic Design of Engineered Timber Constructions: The Case of Low-Dissipative Structures
In the present paper the importance of the dissipated energy on the actual structural behaviour of low-dissipative structures as glulam portal frames with mechanical fasteners under seismic...

A General Hysteresis Model for Wood Structures
To predict the dynamic response of a wood structure, its energy dissipation mechanism and hysteresis behavior must be appropriately modeled. This paper presents a new hysteresis model...

Fire Retardant Treated Wood
The paper explains how FRTW chemicals react with combustible gases. It describes the two types into which FRTW is divided. Misconceptions about FRTW are also addressed....

 

 

 

 

Return to search