Optimum Design of Laminated Metal Matrix Composites
With the increased demand for high-strength, lightweight materials that function successfully in high temperature environments, the effective development of metal matrix composites has...
Frictionless Contact of Composite Laminates
An approximate solution technique for determination of contact stress distribution under a curved, rigid punch indenting an arbitrary laminated composite plate is outlined. The individual...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
Development of a Constitutive Model for Impact Limiters
A constitutive model is being developed for 'impact limiter' materials such as aluminum honeycombs and polyurethane foams. Among other applications, these materials...
Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...
On Statistical Micromechanical Process Damage Models for Brittle Solids with Interacting Microcracks
Two-dimensional micromechanical damage models with strongly interacting microcracks are presented to investigate the overall nonlinear mechanical responses of microcrack-weakened brittle...
Crack Growth Stability in Ice
The mechanics of stable, time dependent crack growth as a function of geometry and increasing crack length in saline an freshwater columnar ice are examined in this paper. Experimental...
Comparison of a Microscopic Model and a Macroscopic Model Predictions on the Stress-Strain Behavior of a Soil
The stress-strain behavior of a soil under drained triaxial conditions was simulated using the Microscopic constitutive model TRUBAL. The model parameters for the Macroscopic constitutive...
Numerical Undrained Cyclic Loading Simulations Using the Discrete Element Method
Three dimensional numerical experiments on random arrays of rough spheres were performed using the discrete element method to study the behavior of granular soil and the results were compared...
Testing the Limits
More than 100,000 bridges in the U.S. are considered structurally deficient and in need of posted load limits or repair. As the number continues to mount, engineers search for a better...
Plate Load and Pressuremeter Testing in Saprolite
On the island of Oahu, Hawaii, an exploratory tunnel for the Interstate Route H-3 highway was completed in December 1989. The purpose of the exploratory tunnel was two-fold; first to locate...
Settlement of Shallow Foundations in Sands Selection of Stiffness on the Basis of Penetration Resistance
The paper discusses the use of the formulae of the theory of elasticity to compute the settlement of shallow foundations in sands when subjected to static loading. Special emphasis is...
Pressuremeter Stress Relaxation Testing in a Permafrost Tunnel
In the spring of 1988, a geotechnical testing program was carried out in the U.S. Army CRREL Permafrost Tunnel, located at Fox, near Fairbanks, Alaska. In all, some thirty cone penetrometer...
Stabilization of Collapsible Alluvial Soil Using Dynamic Compaction
The effectiveness of dynamic compaction for improving collapsible soils was evaluated under field conditions using full scale load tests performed on 1.5 m square footings. Tests were...
Group Efficiency of Piles Driven Into Sands: A Simple Approach
A simplified analysis for computing group efficiency of circular displacement piles in sands is presented. Pile installation is assumed to cause soil displacements in the horizontal direction...
Do Simplistic Methods of Foundation Design Produce Reliable Foundations?
Many foundations today are designed using deterministic (single value) analysis techniques which do not reflect the natural variability of soil properties. If the standard deviation and...
Settlement of Footings on Sands?Accuracy and Reliability
Twelve methods of estimating settlements of footings on sand were evaluated by comparing calculated settlements with measured settlements. Each of the methods was evaluated in terms of...
Modification of
The response of piles in a rectangular group subjected to lateral loading has been analyzed using a three-dimensional finite element model to evaluate the effect of pile spacing on lateral...
Hugo 1989 - The Performance of Structures in the Wind
The performance of buildings in the Carolinas during Hurricane Hugo, 21-22 September 1989, is reviewed. Wind speeds in most locations were below the design levels specified in the local...
Lessons Learned by a Wind Engineer
Surface wind speeds during the passage of Hurricane Hugo through the U.S. Virgin Islands and Puerto Rico are described. Although damage to the affected areas was extensive, an assessment...
Return to search