Quality Control: Bridge Steel Fabrication and Erection
This paper examines the Quality Control Program Plan (QCPP) developed by Frederic R. Harris, Inc. (FRH) for fabrication and erection inspection of over 5,448,000 kg of AASHTO Fracture...
In Search of Better Load Ratings
Typically, engineers must make a number of subjective assumptions regarding loading and response behavior when they develop a load rating for civil structures. As a result, many unknowns...
All Dressed Up
Its location at 660 Madison Avenue will put the new home of clothier Barneys New York in the heart of Manhattan's exclusive midtown shopping district, but the $120 million...
Haunted by the Past
Given the legacy of the construction of the Missouri Valley Water Tunnel in the 1920s�eight deaths and numerous injuries�it's no wonder that safety was foremost in the minds...
Dynamic Loading
This chapter deals with those problems of finite element analysis of concrete structures, which arise from the dynamic nature of loadings. Following a short enumeration of the dynamic...
Seismic Design of Multi-Story, Wood-Framed Buildings
The seismic design and analysis of wood-framed structures is relatively simple; however, the challenges that present themselves within this design medium are shear and overturning force...
LRFD for Timber Structures
The use of load and resistance design (LRFD) methodologies is increasingly becoming the standard analysis procedure for engineering design. The concrete industry has used a variation of...
Structural Fire Resistance Design of Wood Beams and Columns: A Comparison of European and North American Practices
North American and Eurocode design methods for fire-resistive exposed wood members provide a very good example of the translation of research into practical engineering design procedures....
Stabilization of South Texas Soils with Fly Ash
The expansive soils of south Texas have traditionally been stabilized with lime or Portland cement. As an alternative, a class F fly ash was tried to stabilize expansive soils obtained...
Enzyme Enhanced Stabilization of Soil and Fly Ash
The purpose of this research was to determine if enzymes could be utilized to increased the strength and stability of soil mixed with fly ash. Samples were prepared with and without the...
A Study of Engineering Properties of a Clay Modified by Ash and Slag
Fly ash from power plants and slag from steel mills are two industrial solid wastes. These wastes can be utilized as soil stabilizers. In this study, a clay with low plasticity is mixed...
Driven Then Pushed Minicone Tests in a Sand Chamber
For a general knowledge on the Standard Cone Penetrometer test and its uses the reader is referred to the work of Briaud and Miran (1991). For this study (Khalaf and Briaud, 1992) a smaller...
Lateral Loading Curves from Pressuremeter Tests
The large drilled shafts for the proposed Klamath Falls Bridge, which are to be founded in diatomaceous silts, were to be designed to withstand earthquake induced large cyclic loading....
Evaluation of Dilatometer Method to Determine Axial Capacity of Driven Model Pipe Piles in Clay
The flat Dilatometer (DMT) provides a unique approach to estimate the effective stress axial capacity of driven displacement piles in clay. An investigation using this approach was performed...
Drilled Shaft Friction Evaluation via Pullout Tests
The history, development, and field test results of a small-scale 'pullout' test to assess the skin friction (fsu) for drilled shafts socketed in...
Verification of Deep Foundations by NDT Methods
Deep foundations are designed using static analysis techniques and the soil strength and structural integrity are then confirmed by static load tests. However, static tests are time consuming...
Piles for Marquette University Math Building
This paper presents a comparison of static pile capacity predictions using CPT cone resistance results with results of a test pile program and production pile driving. Pile capacity prediction...
3-D Deformation Analysis of Pile Groups During Wave Loading
Deformation predictions of pile group supporting one leg of Magnus platform were conducted using the 3-D nonlinear computer program SPLICE (Structure/Pile/Soil Interaction Analysis) and...
Drilled Shaft Side Resistance in Clay Soil to Rock
An evaluation is made of available field load test data for the axial side clay soils to hard rocks. Conventional total stress interpretations by the alpha method are used to examine the...
Execution and Evaluation of High Capacity Caisson Load Tests in Glacial Deposits
As part of the Boston Harbor clean up project, the new 1,000 mgd Deer Island Sewerage treatment plant includes ten 240 feet high egg-shaped 'residuals' tanks. Contract documents called...
Return to search