ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Hydraulic Design for La Quinta Stormwater Project
An upstream detention basin was designed to trap debris and attenuate flows into Bear Creek Channel. The high velocity supercritical flow made a one side bank protection design for the...

Ultimate Sediment Concentration
The sediment rating curve is used to relate sediment discharge to water discharge, under steady equilibrium flow conditions. The slope of the sediment rating curve is a measure of the...

Kinematics and Dynamics of Overland Flow
C. Y. Guo combined the kinematic wave approximation with Horton's infiltration formula to analytically solve the propagation of a two-dimensional overland flow on a previous...

Kankakee Dam Discharge Characteristics
The low-head dam on the Kankakee River has flashboards which are installed as the discharge decreases in early summer, to maintain the upstream pool level. In response to concern over...

Parameter Estimation for Multiphase Porous Media Systems
Parameter estimation for multiphase flow in porous media involves estimation of nonlinear functional relationships. These include the capillary pressure - saturation relation and the relative...

Finite Element Modeling in Free-Surface Hydromechanics
A finite element semi-discrete approximation is applied to the conservation law form of the two-dimensional, depth-averaged free-surface Navier-Stokes equations governing incompressible...

Rigid-Lid Flow Calculations with MacCormack's Method
R.W. MacCormack's Method is employed for the calculation of subcritical flow in shallow water. The flow is assumed to be incompressible with rigid boundaries above and below,...

Evaluation of Diffusion Models for Flood Routing
A study has been conducted to define the range of conditions with respect to hydrographs and channels encountered by SCS engineers in flood plain/flood control projects and to test two...

Predicting Channel Recovery from Sand and Gravel Extraction in the Naugatuck River and Adjacent Floodplain
Gravel extraction at five sites along the Naugatuck River in Connecticut is of sufficient magnitude that channel recovery to pre-mining morphology is expected to require up to several...

Twenty Years of Experience in Unsteady Flow Modeling of Open Channels at TVA
Two concerns prompted the development of dynamic methods for flow routings: (a) the safety of the nuclear plants being planned along the Tennessee River in the 1960's and...

Modeling of a Low Head Hydroelectric Project
In order to shorten the time to develop a hydroelectric project at the Corps of Engineers Hannibal Lock and Dam on the Ohio River for the City of New Martinsville, West Virginia, a turnkey...

One-Dimensional Tidal Circulation Model
A finite-element, one-dimensional numerical model of tidal circulation was developed for estuarine and channel flow applications. The model was designed for the prediction of tide heights...

Simulation and Video Animation of Canal Flushing Created by a Tide Gate
A tide-gate algorithm was added to a one-dimensional unsteady flow model that was calibrated, verified, and used to determine the locations of as many as five tide gates that would maximize...

Measurement and Analysis of Tracfcfifc-Induced Transient Motion in Navigation Channels
Two-induced physical effects related to navigation changes on the Kanawha River, West Virginia were measured at three environmentally sensitive representative locations. The purpose of...

Studies of Hydraulic Jump by the Flow Routing
The high energy of floodwater passing from a reservoir needs to be dissipated to prevent scouring and damage from the dam and other downstream structures. Hydraulic jump is a common way...

Discharge Measurement by Thermal Dilution
A flume study was conducted to develop and improve the thermal dilution method of discharge measurement in trapezodial channels. The study was performed in an indoor channel with dischages...

Measurements of Mean Velocity, Turbulence and Temperature in a Deflected, Heated Water Jet
A submerged heated water jet issuing from a vertical wall into a turbulent flow in a rectangular open channel is investigated experimentally to determine the mean velocity, turbulence...

Drag Characteristics of Spheres in Bingham Fluids
R.W. Ansley and T.N. Smith's type of drag relation can be traced back closely, if not completely, to the Newtonian drag curve. The equivalent diameter for a sphere in a Bingham...

Gas Transfer at the Water Surface: Measurements of Gas Concentration Fluctuations
The paper describes measurements of fluctuating gas (oxygen) concentrations by means of a polarographic microscope near the air-water interface. The objective is to demonstrate the feasibility...

Hydraulic Effects on Swimming Fish in Fish Passage Structures
The implications of profile drag, weight, and buoyant forces on energy and power requirements of fish swimming through fish passage structures are considered. Where hydraulic grade lines...

 

 

 

 

Return to search