ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Lubrication Theory Analysis of the Permeability of Rough-Walled Fractures
Lubrication theory is used to study the permeability of rough-walled rock fractures. Two idealized models of a fracture, in which the roughness follows a sinusoidal or a sawtooth variation,...

Unsaturated Flow Through a Variable Aperture Fracture in Topopah Spring Welded Tuff
The role of fractures in unsaturated flow through welded and nonwelded tuffaceous rocks is a fundamental question being addressed in performance assessment activities for the Yucca Mountain...

Modelling of Hydro-Thermo-Mechanical Effects in a Fracture Intersecting a Nuclear Waste Deposition Hole
The groundwater flow in a vertical fracture intersecting a hypothetical nuclear waste deposition hole was examined. After excavation and emplacement of the nuclear waste canister, the...

Boundary Integral Methods for Unsaturated Flow
A boundary integral equation method (BIEM) is described for numerical analysis of quasilinear steady unsaturated flow in homogeneous material. The applicability of the exponential model...

Analysis of Solute Transport in an Intermediate-Scale Unsaturated Flow Experiment
A simplified stochastic model was derived and applied to two unsaturated flow experiments conducted in an intermediate-scale caisson. Parameters for the flow and transport models were...

Theory of Matrix and Fracture Flow Regimes in Unsaturated, Fractured Porous Media
The flow behavior of a two-dimensional, unsaturated fracture-matrix system is characterized by a critical flux q_f^*...

Effect of a Low-Permeability Layer on Calculated Gas Flow at Yucca Mountain
Yucca Mountain is being studied to determine its suitability as a location for a high-level nuclear waste repository. The mountain is a steep-sided linear ridge which is underlain by a...

Process and Criteria for Valuation of the Ground-Water Flow Models in the OECD/NEA International Stripa Project
In 1986, the Site Characterization and Validation (SCV) Program was initiated as part of Phase III of the OECD/NEA International Stripa Project. The principal intent of the SCV Program...

Demonstration of a Repository Performance Assessment Capability at the U.S. Nuclear Regulatory Commission
In order to better review licensing submittals for a High-Level Waste Repository, the U.S. Nuclear Regulatory Commission staff has expanded and improved its capability to conduct performance...

Research Program to Develop and Validate Conceptual Models for Flow and Transport Through Unsaturated, Fractured Rock
As part of the Yucca Mountain Project, our research program to develop and validate conceptual models for flow and transport through unsaturated fractured rock integrates fundamental physical...

An Alternative Method to Mariotte Reservoir System for Maintaining Constant Hydraulic Pressure
Several problems with the Mariotte reservoir system were discovered when it was used to apply a constant water pressure as a boundary condition for a prolonged period. The constant-pressure...

Status of WIPP Compliance with EPA 40 CFR 191, December 1990?SAND90-2424C
Sandia National Laboratories is conducting performance assessments for the United States Department of Energy to use in evaluating compliance of the Waste Isolation Pilot Plant with EPA...

Performance Assessment Calculational Exercises (PACE-90): Overview and Summary
PACE-90 was undertaken by the Yucca Mountain Site Characterization Project in order to develop expertise in computational capabilities and to aid in identification of critical elements...

Application of TQM to the Waste Management QA Regulatory Arena
Over the past several years, a number of the scientists involved with the high-level radioactive waste repository project have expressed concern regarding the application of quality assurance...

Application of QA Program for Yucca Mountain Site Characterization Project Geologic Investigations
The High Level Waste Program requires safe disposal of nuclear waste in a geologic medium for thousands of years. Traditionally, the nuclear industry relies heavily on engineered items....

Location and Assessment of Groundwater Discharge
Methods have been developed for locating and measuring groundwater discharges, which are often obscured by the presence of overlying surface water. A sediment probe, towed behind a moving...

The Shaft Excavation Effect Experiment
The Shaft Excavation Effect (SEE) experiment has been carried out by Power Reactor and Nuclear Fuel Development Corporation (PNC). Corresponding to this experiment, an evaluation system...

Three-Dimensional Groundwater Flow Modelling for a Potential Repository Site
In Finland site investigations are carried out at five places in order to find a suitable site in the Finnish bedrock for a repository for spent nuclear fuel. The aim is to model the bedrock...

Management of Comments on DOE's Site Characterization Plan (SCP) and Integration with the Planned Geotechnical Program
The U.S. Department of Energy (DOE) has committed to respond to comments on the SCP throughout the site characterization process. As of January 1990 DOE has received 4,574 comments on...

Management and Research of Desert Tortoises for the Yucca Mountain Project
A program has been developed for the Yucca Mountain Project (YMP) to manage and study the desert tortoise (Gopherus agassizi), a threatened species that occurs at low densities at Yucca...

 

 

 

 

Return to search