Who Pays for the Unexpected in Construction
The problem of who pays for the unexpected in construction is discussed in relation to the testing and inspection of construction materials. Laboratory is often blamed for poor construction...
Laboratory and Field Research in Construction Automation
This paper presents a series of research projects to build and test prototype systems. It has been found that prototyping provides an economical approach to support both basic and applied...
Construction Inspection Responsibility from the Viewpoint of a General Contractor and Construction Manager on a GMP Project
Absent local laws to the contrary, any member of the construction team, the Owner, Architect, or Contractor, can theoretically arrange for and provide any testing and inspection that may...
Seismic Design Issues for Immersed Tube Tunnels
This paper provides an overview of the issues and the state of the art techniques in the seismic design of immersed tube tunnels (ITT). Particular focus is given to the ITT presently planned...
Effect of Temperature on Gas Transfer at Low Surface Renewal Rates
In order to investigate the dependence of gas transfer coefficients on temperature under conditions of low surface renewal rates, laboratory experiments were conducted using simultaneous...
Tracer Gas Transfer Technique for Shallow Bays
Developmental field tests using propane and Rhodamine WT tracers were conducted to adapt the tracer gas method for use in shallow bays. A special injection box was built to prevent mixing...
Gas Transfer Measurements on an Ice-Covered River
Wasteload allocation for existing and proposed pulp mills in the Athabasca River Basin of northern Alberta, Canada, necessitated measurement of the atmospheric reaeration rate, K2,...
Field Tests on a Bubbleless Membrane Aerator
A novel bubbleless hollow fiber membrane aerator has been developed and tested for the oxygenation of water. In this process pure oxygen is maintained on the inside of a bundle of sealed,...
Symposium on Ground Water
This proceedings,
Quake-Safe Housing, Again
Because so little data exist about earthquake behavior of buildings that have been strengthened to meet seismic codes, many engineers are curious about the Hotel Oakland in California...
Where Does Rock Begin Beneath Philadelphia?
Philadelphia provides an excellent example of the engineering problems associated with the interpretation of saprolite/weathered rock/sound rock profiles. The bedrock beneath the city...
Instrumentation for SASW Testing
The Spectral-Analysis-of-Surface-Waves (SASW) method is presented. Various test setups and corresponding data reduction procedures are discussed. Several instrumentation systems have been...
Recent Advances in Cone Penetrometer Measurements (Software and Hardware) and Its Application to Liquefaction Susceptibility
Some of the recent advances made in Cone Penetration Test (CPT) data acquisition system and real time processing of CPT data are presented. A key component of the new CPT data acquisition...
Use of Bender Elements in Soil Dynamics Experiments
Transducers employing piezoelectric bender elements have been found to be versatile sources and receivers of small-amplitude shear waves, with multiple potential applications. The constitutive...
Use of Piezoceramic Bender Elements in Soil Dynamics Testing
The use of piezoceramic bender elements is described to measure small strain, shear wave velocity distributions in soil models used in centrifuge and shake table testing. Experimental...
Plastic Highway Bridges
For highway bridges, composites are most effective in cables and decks. Researchers have developed and tested cables and deck sections for strength and fatigue resistance. Link-type cables...
Recent Advances in Seismic Design and Retrofit of California Bridges
This paper describes the damage and lessons learned from the most recent major earthquakes, the resulting bridge seismic design and detailing changes and the seismic retrofit program implemented...
Seismic Design and Performance of Railroad Bridges
Damage to railroad bridges during earthquakes in the United States and Japan is summarized. Research tasks are outlined to develop seismic design and retrofit criteria for railroad bridges....
Seismic Design for Port of Los Angeles, 2020 Program
Due to the Port of Los Angeles' (POLA) importance as a regional hub for transportation and commerce and the potential for a major seismic event in the Southern California...
Seismic Practices for the Air Transportation System: Evolution and Needs
The seismic performance of air transportation systems is reviewed. The evolution of seismic design criteria and practices for major air transportation system elements is discussed. The...
Return to search