Approximate Reliability Analysis of Highway Bridges Under the Action of Random Vehicles?In Relation to an Interchange Bridge of China
In relation to an interchange curved bridge of China, a simple method by FSE for analysis of stochastic vibration has been proposed. The random vibration characteristics of bridge structures...
Rethinking Flood Control Channel Design
Until recently, the standard method of flood control was channelization�converting a natural stream to a uniform channel cross section. But this single objective approach is coming under...
The NOVA SPAN Bridge System
The NOVA SPAN Bridge concept provides the basis for the design and construction of a new variant in the field of bridges and culverts which, in its performance and operation, incorporates...
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Design of Drainage Pipes Below Landfills
Drainage pipes are an essential component of landfills. Even though their embedment conditions differ substantially from those of pipes for municipal utilities near the ground surface,...
A Look Back in Time to Verify Life Cycle Cost Analyses
The proper engineering design of any hydraulic structure requires consideration of different but interrelated fields of: 1) Planning, 2) Hydrology, 3) Hydraulics, 4) Structural, 5) Installation,...
Less Bang for the Buck
Blasting rock is practical on job sites with ample space, but on construction sites in urbans or developed settings, contractors are shying away from blasting for several reasons. Noise...
Shop Drawings: In Need of Respect
Engineer Robert L. Boehmig voices his concerns regarding the preparation of structural shop drawings. He gives his view of the shop drawing's role in construction projects,...
A Stratified Percolation Model for Saturated and Unsaturated Flow Through Natural Fractures
The geometry of the asperities of contact between the two surfaces of a fracture and of the adjacent void spaces determines fluid flow through a fracture and the mechanical deformation...
Study of Fractal Aperture Distribution and Flow in Fractures
This study examines the roughness profiles and aperture distributions of fractures and faults by using concepts from fractal geometry. Simple models of flow of fluid in rough fractures...
Drill-Back Studies Examine Fractured, Heated Rock
To investigate the effects of heating on the mineralogical, geochemical, and mechanical properties of rock by high-level radioactive waste, cores are being examined from holes penetrating...
Building of a Conceptual Model at the UE25-C Hole Complex
U.S. Geological Survey and Lawrence Berkeley Laboratory are attempting to construct a conceptual model of the UE25-c hole complex. An interdisciplinary approach is discussed where all...
Combined Analytical/Numerical Approaches to Solving Fluid Flow Problems in the Unsaturated Zone at Yucca Mountain
Various analytical and numerical approaches are presented for the study of unsaturated flow processes in the vicinity of the Yucca Mountain, Nevada, the proposed site of an underground...
An Investigation of the Mechanical and Hydrologic Behavior of Tuff Fractures Under Saturated Conditions
The mechanical and hydrologic behavior of natural-fractures in a partially welded tuff rock were investigated. Tuff cores, each containing part of the same natural fracture oriented subparallel...
Diffusion Coefficients and Hydraulic Conductivity in Unsaturated Hanford Soils and Sediments
Two groundwater transport parameters of some Hanford formation materials, the hydraulic conductivity and the diffusion coefficient, were measured to aid in predicting contaminant migration....
Seismic Characterization of Fracture Properties
Laboratory measurements of the mechanical stiffness, hydraulic conductivity and seismic properties of three natural fractures were made as a function of applied normal stress. Seismic...
Motion Control of Space Structures
A new area of civil engineering is emerging as we begin to establish a permanent presence in space. The new area of civil engineering is the motion control of space structures. This paper...
Actively Controlled Optimum Structural Design
This paper deals with the investigation of the number and location of actuators and sensors on the optimum structure and control design of space structures. The optimization problem is...
Space Construction: A CSI Perspective
This paper outlines the control structure interaction (CSI) problem for space construction engineers. An overview of the Control Astrophysics and Structures Experiment in Space (CASES)...
A Design Process for Water Distribution Systems Including Optimization
Design of a water distribution system is a multi-level process from preliminary planning to final detailed sizing of components. Unfortunately as in many design problems, a final detailed...
Return to search