What Type of Sewer Pipe is Best? Life-cycle Cost Analysis Yields Answer
In the past, many engineers have selected the type of sewer pipe for a particular project based mainly on a comparison of initial costs of concrete, steel, and other types of pipes. This...

The ABC'S (and Q) of Cold-Formed Steel Design
Cold-formed structural members are steel components that have been put into their cross-sectional shape by cold bending of flat sheets. Local compressive buckling must be carefully considered...

General Principles for the Stability Design of Metal Structures
The Structural Stability Research Council (SSRC) Technical Memorandum No. 5 is explored; this memorandum includes the general principles that form the bases of various SSRC recommended...

Luxury Hotel Features New York's First 8,000-psi Concrete
Designers of New York's $100-million Helmsley Palace Hotel realized significant economies by the use of high-strength concrete to replace structural steel and reduce column...

Construction of Power Generation Facilities
The impact of the present construction practice, codes, standards and regulations on the construction of power generation facilities is reviewed and examined in papers presented at the...

Symposium on Deep Foundations
Twenty-six case histories on the design, installation and performance of deep foundations are included. The emphasis is on testing and field data. Deep foundations are explored in cretaceous...

The Fly-Over: It Unclogs Urban Traffic in A Hurry
Fly-overs are light-weight, low-cost, prefabricated steel structures that elevate only one or two lanes over a traffic-choked city intersection but dramatically reduce congestion. By removing...

Cognac: World's Tallest Offshore Oil Platform
Shell Oil's 1980 OCEA-winner is a three-sectioned design of steel fabrication and deep-sea installation. Cognac is currently the world's tallest, heaviest, and...

New Telescope has Innovative Structural Design
The new optical telescope at Mt. Hopkins, Arizona, is the third largest in the world, but one of the most economical to build. The savings is the result of using 6 lightweight, small mirrors...

Republic Steel Recycling Over 85% of Wastewater from Steel Mill
At its hot-rolling mill in Canton, Ohio, Republic Steel is recycling over 85% of the wastewater it produces. The wastewater contains suspended particles of scale and oils and greases....

Structural Design of Tall Steel Buildings
This is the second in the ASCE five-volume Tall Building series. It is a comprehensive reference record and guide to the design and behavior of tall steel buildings. The volume is divided...

Seepage Cutoff Wall Installed Through Dam is Construction First
A new construction technique has been developed which provides a permanent solution to the foundation problems at Wolf Creek Dam. Muddy flows and sinkholes discovered in 1968 led to a...

Steel Plate Shear Walls Resist Lateral Load, Cut Costs
Two new buildings have a seldom-used stiffening system�� steel plate shear walls. Reasons for using them, rather than reinforced concrete shear walls or steel or concrete rigid frames,...

World's Tallest Offshore Platform Stands in 1025 Ft of Water
During the summer and fall of 1977 and 1978, Shell Oil installed the world's deepest drilling and production platform in water. Located in 1025-ft of water at the Cognac tract...

Concrete Microwave Tower is Award Winner
A microwave tower in Florida was built of cast-in-place concrete instead of steel, because: (1)Concrete was considered more esthetic than steel; and (2)concrete was more resistant than...

$20 Million for Billet Grinding Eliminates Waste
Republic Steel Corp. invested $20,000,000 in the world's largest billet grinding facility for conditioning steel, in Canton, Ohio. It was nominated for the 1979 Outstanding...

Largest Inverted Shell Houses Two Theaters
A meeting center in Albany, New York, has such a complex shape that it took months just to design its surface mathematically. Perched on a pedestal, it is nearly elliptical in plan. From...

Stub Girders Cut Steel Use
One innovation in steel building construction, now 10 years old, is the steel stub girder floor framing system. By using a girder that is a composite of steel girder, metal deck and lightweight...

Redesigning the Auto: A Key to Solving the U.S. Energy
The automobile is a tremendous consumer of energy. The entire transport sector uses 26% of the energy used in the U.S.�� and half the oil. In fact, the American auto alone consumes one-ninth...

Threaded Rebars Spin Down Time
A rebar splicing technique was a major factor in saving two year's construction time on California's $33 million, 9000 ft (2743 m) Antioch Bridge. Rebar splicing...

 

 

 

 

Return to search