Evaluation of PVC Bottom Linear From an Existing Landfill Located in a Subtropical Climate
Remedial action to curtail leachate seepage on a sanitary landfill located in a subtropical climate included the attachment of new PVC liner to an existing 20 mil PVC liner which has been...
Buried Fiberglass Pipe Response to Field Installation Methods
In 1970 near Yuma, Arizona, a field test installation of 30 inch diameter fiberglass pipe was constructed. Twelve years later the pipeline was remeasured. Measurements of pipe profile,...
Strains Induced by Combined Loading in Buried Pressurized Fiberglass Pipe
In 1983 Owens Corning Fiberglas and Utah State University collaborated on a study of combined strain behavior of fiberglass pipe to quantify the bending strain reduction as a function...
Buried Fiberglass Pipe Performance and Installation Requirements and Design Calculations in International Standardization
This paper elaborates on a proposed standard covering details of fiberglass pipe buried installation requirements and criteria for selection of pipe stiffness. It also discusses the selection...
Successful Use of Centrifugally Cast Glassfiber Reinforced Plastic (GRP) Pressure Pipes for Public Works in Sweden
Centrifugally cast GRP pipes were introduced in Sweden 17 years ago for industrial applications mainly as a gravity pipe. The process of pipe manufacturing as well as the pipe itself and...
Nine Years' Service with Deep Polymer Impregnation
A test installation of deep polymer impregnation was applied to a heavily traveled bridge deck in Bethlehem, Pennsylvania, in 1975. The deep polymer impregnation process involved drying...
State of the Art in Concrete-Polymer Materials
Concrete-polymer materials represent a relatively new technology in the construction industry. In some cases polymers are combined with portland cement concrete and, in other cases, polymers...
Design and Construction of World's Tallest Free-standing Fiberglass Stack
The design, fabrication and erection procedures are discussed for a 170-ft free-standing fiberglass reinforced plastic exhaust stack-scrubber system. Advantages and disadvantages in the...
Structural Plastics for the 80s
Engineers in non-civil fields have been using more and more light-weight, high-strength structural plastics and plastic composites every year, but civil engineers have barely begun to...
Counteracting Chloride-Induced Damage to Bridge Decks with Latex and Plastic
Salt used to control ice causes deterioration of reinforced concrete bridge decks, but recent developments, though still somewhat expensive, can prevent deterioration of existing decks....
Polymerization of Concrete Fights Cavitation
The techniques and materials used for the repair of concrete are many and varied. The repair at Dworshak Dam utilized epoxy resins, dry pack mortar, fibrous concrete and a new technique,...
Granular-Fill Dam Protected by PVC Membrane
The design and construction of the Minorca Tailings Basin Starter Dam sets a precedent for the use of plastic membrane for seepage control in the construction of earth fill dams where...
Polymer-Concrete Passes Toughest Test
Almost three years after a pour of polymer-concrete (PC), a full patch of a hole in New York City's Major Deegan Expressway shows no cracks and is adhering well to the original...
Return to search