Analysis of Masonry Walls with Smeared and Discrete Crack Models
To design modern reinforced masonry structures for seismic loads and to evaluate the seismic safety of existing unreinforced masonry buildings, the shear resistance of masonry shear walls...
Behavior and Design of Angle Connections Subjected to Cyclic Axial Force and Shear
The objectives of this study were to establish cyclic behavior of double angle shear connections subjected to axial load and to develop design recommendations. Five cyclic tests of double...
Interaction Between Beam and Steel Connections
The overall objective of the investigation is to study the behavior of a particular steel connection type, flush end plate steel connections, subjected to shear, axial forces, and possibly...
Flexural and Shear Behavior of Combined Concrete and Graphite Epoxy Beams
An experimental and analytical study of six graphite composite beams are presented. Four of the beams incorporated a reinforced concrete slab. The composite action and the effect of concrete...
The Innovative Concept of Semi-rigid Composite Beam
This paper discusses invention and development of a new type of composite beam called 'Semi-rigid Composite Beam.' This new type of beam is expected to behave better than presently used...
Three-Dimensional Stability Analysis of Carpenter Dam
This paper describes the three-dimensional stability analysis of Carpenter Dam. The presence of keyed construction joints between dam monoliths at Carpenter Dam can significantly affect...
In Situ Testing Performed at Jackson Lake Dam
Jackson Lake Dam was rehabilitated from 1986 to 1988 to increase seismic stability. Final foundation improvements consisted of dynamic compaction and mixed inplace soil cement columns....
Graham Lake Dam Remedial Measures Project
Graham Lake Dam consists of a 550-foot long earth embankment and an 80-foot long concrete spillway. Several concerns were identified during project inspections including limited spillway...
Seismic Rehabilitation of Sardis Dam
Extensive subsurface investigation of the embankment dam revealed the existence of a weak layer of silt and soft clay in the original topstratum clay underlaying the upstream shell of...
Seismic Stability Modification Requirements for Pineview Dam
Pineview Dam is located 8 km upstream from Ogden, Utah, and about 8 km from the Wasatch Fault Zone. Preconstruction information and construction records available at the outset of the...
Implications of Stability Analysis for Heat Transfer at Yucca Mountain
An analytical solution has been obtained to the stability problem for an infinite horizontal layer of gas with its humidity constrained to 100%. Latent heat transfer makes convective heat...
An Object Oriented Relational Database for Assessing Radioactive Material Transport
EnviroView is an object oriented relational database used for inventory control and monitoring locations of radioactive and toxic materials. Visual images of local sites, building locations,...
Open Channels in Fractures Maintained by Deposition and Erosion of Colloids
Colloids initially suspended in the water in fractures can deposit onto the fracture surfaces, and will partially or fully clog the fracture. The amount of clogging will depend on whether...
Thin-Walled Finite Element for Curved Multicell Box Girders
The generalized Vlasov's thin-walled beam theory was combined with the finite element technique to develop a new curved thin-walled multicell box girder finite element which can model...
Combined Boundary Element and Finite Element Analysis of Composite Slab on Girder Bridges
In this paper, the coupling of boundary element and finite element methods and its application to analyze slab on girder bridges are studied. The boundary element method (BEM) is employed...
A Generalized Three Invariants Cap Model and its Numerical Implementation to Study Soil-Foundation Interaction
This paper presents a modified cap model that is capable of characterizing cyclic stress-strain behavior of soils and describing variation of shear strength along various stress paths...
Study of a Computer System for Evaluation of Bearing Wall Stresses in Structural Planning ? Reasoning by Neural Network
This report proposes a reasoning system for bearing shear wall stresses in the ultimate state by using geometrical data of buildings and shear walls at the initial stage of aseismic structural...
A Numerical Procedure to Compute Bearing Capacity of Shallow Foundations
A simple numerical procedure of calculation of bearing capacity of shallow foundation is proposed. This procedure employs the Terzaghi-Prandtl model of general shear failure. In this paper,...
Subsidence Properties of Holocene Sediments: S. La.
As part of a comprehensive USGS-sponsored study of processes that drive subsidence and wetland loss in south Louisiana, two continuously cored deep borings (60 m and 72 m) were acquired...
Tidally-Induced Sediment Transport on the Amazon Prodelta
A study of boundary-layer processes on the Amazon River prodelta region was conducted as part of the Amazon Shelf Sediment Study (AmasSeds). Over a 2-week period during the time of high...
Return to search