Channel-changing Processes on the Santa Cruz River, Pima County, Arizona, 1936-86
Lateral channel change on the mainly ephemeral Santa Cruz River, Pima County, Arizona, causes damage and has spawned costly efforts to control bank erosion. Aerial photographs, historical...

Repair of an Improperly Detailed Masonry Facade: A Case History
The masonry facade of an 18-story condominium building was constructed with an inconsistent pattern of shelf angle supports, marginal lateral restraints and without any horizontal control...

Design and Performance of Earth Retaining Structures
The proceedings of the 1990 Specialty Conference on Design and Performance of Earth Retaining Structures was held in Ithaca, New York from June 18-21, 1990. It presents a total of 50 papers...

Sludge Disposal Dallas Style
Dallas, Tex. has discovered that sludge disposal can coexist with environmental concerns. Dallas Water Utilities treats some 200 million gpd, sending the effluent from one of the two treatment...

Form Follows Geometry
The $107 million NCNB Plaza in Tamps, Fla. consists of a 32 floor, 500,000 sq ft, 455 ft tall office tower; a 40,000 sq ft, 78 ft tall banking hall, and a 280,000 sq ft parking garage...

Retaining Forest Roads
The U.S. Department of Agriculture, Forest Service, manages a vast system of roads which provide access to America's national forests. More than 250,000 miles of roads exist...

A Seawall for Sea Mammals
With glass walls only 75 ft from Lake Michigan, an aquarium addition demanded solid seawall protection. Yes, in a strange twist of logic, the first step in creating a whale habitat for...

Building in Reservoirs
The Croton Supply System, one of the three major water supply systems for New York City, is undergoing extensive rehabilitation. In an innovative use of space, some of the new construction...

High Tech on Campus
Hannan Hall, the new laboratory building at The Catholic University of America, has a structure entirely made up of precast concrete panels and 24 in. deep double tees. The loadbearing...

Buckling of Tapered Columns by P-Version of F.E.M.
The local, distortional, overall, and interactive buckling of tapered, thin-walled members under axial compression and flexure are considered by using three-dimensional models based on...

Evaluation and Remediation of Construction Defects in Tilt Wall Panels
Both the surface appearance and structural safety were of concern to the Owner of a five year old warehouse structure that was experiencing delamination of tilt-up wall panels. Delamination...

Concrete Residential Construction in Baja, Mexico
Mexicali, Mexico has experienced earthquakes of magnitude 6.0 to 7.6 on the Richter Scale. A popular and readily available residential construction material is reinforced concrete comprised...

Lateral Force Distribution in Manufactured Housing from Full-Scale Testing
The research focused on the behavior of two manufactured 14 ? 66 ft houses under simulated wind loads. Extensive instrumentation was employed to insure the collection of data that would...

Panel-Sheathed Shear Walls ? Past and Future
In order for a building to resist the lateral forces caused by wind or earthquake, it is necessary that the building include a lateral force resisting system. When the walls are designed...

A Structural Analysis Model for Timber Shear Walls
A numerical modelling procedure for the non-linear analysis of timber shear walls is presented. The model includes the non-linear behavior of the connectors between the sheathing and framing,...

Macroscopic Models for R/C Shear Walls
In this paper, the discussion is mainly focused on four macroscopic models, recently proposed by Japanese researchers, for predicting ultimate strength of reinforced concrete (R/C) shear...

Verification of Macroscopic Models for R/C Walls
Macroscopic models utilized in a plastic analysis for predicting the ultimate strength of reinforced concrete members have been developed in Japan as well as in Europe. In the JCI committee,...

Verification of Macroscopic Models or RC Walls by FEM
Several macroscopic models based on the limit analysis have been proposed for obtaining the ultimate strength of reinforced concrete shear walls in Japan. When using these models, it is...

Parametric Analyses of RC Shear Walls by FEM
In this paper, nonlinear behavior of reinforced concrete shear walls is studied by using the finite element analysis. We applied numerical analyses to a wide range of parameters, such...

Inelastic Performance of Single-Story Masonry Shear Walls
Twenty-two story-height reinforced masonry shear walls have been tested to examine the influence of the applied axial stress, and the amount of vertical and horizontal reinforcement on...

 

 

 

 

Return to search