Implementation of Watershed Planning in Chester County Pennsylvania
The author presents portions of a study into the current watershed regulatory framework in Pennsylvania, and how effectively this framework supports watershed sustainability when faced...
Sediment Erosion Rate in the Baltimore Harbor
In-situ erosion experiments were conducted at four selected sites in the Baltimore harbor in May 1995 using the VIMS Sea Carousel. The measurements showed that the erosion rate decreased...
The Northridge Fractures: Are We Learning the Right Lessons?
After the Northridge earthquake in January 1994, engineers found problems with special moment-resisting frames. There were multiple facture modes, and typical damage involved primary crack...
Study of Interaction Between Pneumatic Spherical and Cylindrical Form Shells Subjected to Wind Pressure
In the design of pneumatic membrane structures, analysis of stress and deformations of structures subjected to wind is among the most important requirements. For the purpose of studying...
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Analysis of Composite Panels Using Newton's Method
Postbuckling response prediction of composite panels using Newton's method will be discussed. The traditional approach of nonlinear finite element analysis is to use a Newton-Raphson approach...
Axisymmetric Vibrations of Thick-Walled Cylindrical Tubes in the Presence of Thermal Residual Stresses
The paper presents an approach to the analysis of axisymmetric vibrations of thick-walled specially orthotropic multilayered cylindrical tubes. The first part of the paper is concerned...
Thermal Stresses in Piezoelectric Materials: A Boundary Integral Formulation
With the increasing use of piezoelectric materials in electromechanical devices which are often required to function in thermally hostile environment, thermal stresses and their influence...
Implementation of a Viscoplastic, Kinematic Hardening Constitutive Model for Impact Prediction
This paper reports on a preliminary study to determine the significance of the Bauschinger effect on modeling impact and other large deformation events. Such events have significant implications...
Physical Model Tests of Dolos Impact Stresses
An on-going experimental study to determine impact stresses and static nesting stresses in instrumented large scale model dolosse is described in this paper. Seven dolosse were instrumented...
Comprehensive Reliability Analysis of Prestressed Concrete Beams
Using second moment methods, the reliability with respect to several limit states for seventy three prestressed concrete beams is assessed. These beams that are extensively used in the...
Behavior of RC Beams under Sustained Load
Experimental results of eight reinforced concrete beams under 3-month's sustained load, with the ratio of shear span to depth equal to 2.5, are reported. It is shown by tests that the...
The Canadian Approach in the Design of Wood Structures: Conversion to Limit States Design
During the early 70's, the National Building Code of Canada (NBCC) established the principle that structural design be carried out using the limit states design (LSD) method. The technical...
LRFD Provisions for Wood Bridges
A project to develop a load and resistance factor design (LRFD) edition of the American Association of State Highway and Transportation Officials (AASHTO) Standard Specifications for Highway...
Test Experience with Heavy Angle Dead End Lattice Transmission Towers
During the past three years, the Electric Power Research Institute's Transmission Line Mechanical Research Center has conducted full scale tests on three 500kV heavy angle dead end lattice...
Metal Truss Plates: Less than Full-Depth Penetration and Shear Buckling
This paper presents the results of two experimental studies on metal truss plates which are used to join members of wood trusses. The first study investigated the effect that less than...
Shear Design Guidelines for Polyester Concrete Using Recycled Plastic
Previous research on the shear behavior of steel-reinforced polymer concrete (PC) beams has been very limited and no efficient design procedures have been proposed. In all the previous...
Fatigue Damage Accumulation Under Stochastic Stress Histories
An extensive simulation study was performed to generate random Gaussian stress time histories from power spectral densities (psd's). The psd's of time histories were selected to represent...
A Nonlinear-Analysis-Based Procedure for Evaluating Load-Carrying Capacity of In-Plane Steel Frames
A simple method based on geometrically nonlinear analysis is proposed to evaluate the load-carrying capacity of a steel structure. The effects of material nonlinearity and residual stress...
Anchorage of Non-Metallic Prestressing Tendons
Experimental confirmation tests were conducted to evaluate mechanical and epoxy socketed anchors for fiber reinforced plastic (FRP) prestressing tendons. The studies found that a parabolically...
Return to search