Heat Transfer in Vertical Concentric Cylinders in a High Level Nuclear Waste Repository
Modeling free convection heat transfer in an cylindrical annular enclosure is still an active area of research and an important problem to be addressed in the high level nuclear waste...
HWVP Compliance with the Hanford Site Solid Waste Acceptance Criteria
This report describes the Hanford Waste Vitrification project (HWVP), which will be located at the Haford Site. The Hanford Site encompasses a 560-mi2...
Tolerance Requirements for Remote Handling at the Hanford Vitrification Project
A new and innovative approach to installation of the many remote nozzles and electrical connectors that must be installed to demanding tolerances has been developed by the architect/engineer...
Object Oriented Design of Finite Element Software for Transient, Non-Linear Coupling Problems
The application of the Finite Element Method to general transient, non-linearly coupled problems calls for high conceptual clarity in software design. In order to attain extendibility...
Verification Tests for Transport Modeling in Coastal Aquifers
The U.S. Geological Survey three dimensional Heat and Solute Transport (HST3D) model is used to simulate fate and transport of dissolved contaminant in coastal aquifers. The model originally...
Steady-State Nonlinear Heat Transfer in Multilayered Composite Panels
A two-dimensional computational model is developed for the nonlinear heat transfer in multilayered composite panels. The model is based on a first-order thermal lamination theory with...
The Feasibility of Processes for the Production of Oxygen on the Moon
Twenty different processes for the production of oxygen on the Moon have been proposed. An evaluation of their perceived feasibility is presented. The lunar liquid oxygen (LLOX) production...
Beneficiation and Comminution Circuit for the Production of Lunar Liquid Oxygen (LLOX)
A complete lunar beneficiation and comminution circuit has been designed that requires no air or fluid locks for feed introduction or egress, with the exception of a vapor pyrolysis station....
Space Habitat Contaminant Growth Models?Part II
This paper reports on the continuation of work being done at NASA's Center for Space Environmental Health (CSEH) at the University of Colorado at Boulder on contaminant growth modelling...
Approximation of Convective Processes by Cyclic AOI Methods
Convective or advective processes play a role in many models for civil engineering applications. For example in transport equations, in hydrodynamic equations or wave energy equations....
MUT1D: User-Friendly One-Dimensional Thermal Model
MUT1D is a microcomputer-based heat conduction model which uses implicit finite difference techniques to determine the thermal regime and track the movement of the phase change front in...
PS 5 Sewage Lagoon Embankment Stabilization
In 1981 an embankment containing a three-cell wastewater treatment lagoon was constructed adjacent to the northern edge of the Pump Station 5 gravel pad on the Trans Alaska Pipeline System....
Analysis of Waterbody Surface Heat Exchange
The Edinger-Duttweiler-Geyer (EDG) approach for estimating heat exchange at a water surface was examined and its applicability to ice-covered waterbodies determined. The EDG linearized...
Heat Exchange at the Ice/Water Interface on Flowing Water
Any time the water flowing under an ice cover has a temperature above freezing, there is an exchange of heat between the water and the ice. Earlier work by Ashton and others provided adequate...
Product Quality and Process Control in the Windscale Vitrification Plant
The Windscale Vitrification Plant (WVP) is owned and operated by British Nuclear Fuels (BNFL) at the Sellafield Site in England. The purpose of the facility is to condition the high level...
Behaviour of Plutonium, Rare Earth Elements and Elements of the Platinum Group in Vitreous Phosphate Composites During Liquid HLW Vitrification
The methods of ?-spectrometry, ?-scanning, ?-radiography, optical microscopy, x-ray phase and x-ray fluorescent analyses were used to study the behaviour of Pu, La, Ce, Nd, Sm, Ru, Rh,...
Emplacement Drift Temperature Reduction by Cooling Enhancement and Ventilation
The application of cooling enhancement in a short vertical container emplacement layout is analyzed. Two 25 m-long heat pipes upward oriented at 45 degrees are installed at each emplacement...
Three-Dimensional Thermal Analysis for Temperature Distribution in Geological Formation
A three-dimensional conduction heat transfer program has been developed for use on microcomputer for thermal analysis of a conductive medium subject to, finite length heat sources. The...
The Constructive Use of Heat in an Unsaturated Tuff Repository
By designing the engineered barrier system in an unsaturated tuff repository to constructively use heat, the waste containers can be kept dry for hundreds of years. Without water, the...
A Proposed Regulatory Guide Basis for Spent Fuel Decay Heat
A proposed revision to Regulatory Guide 3.54, 'Spent Fuel Heat Generation in an Independent Spent Fuel Storage Installation' has been developed for the U.S. Nuclear...
Return to search