Avoiding Impacts of Collapsed Mines on Railways: A Multidisciplinary Geophysical Detective Approach
The presence of abandoned mine workings can pose a significant risk to the use and development of surface structures above them, including railway lines. Typically, the adverse and often sudden effects...

Using Geophysics to Assess Geohazards Before Construction: Increase Your Odds for Success!
Understanding subsurface conditions is the key to any successful construction project, including new construction, excavation, and drilling. The consideration and understanding of the subsurface geology...

Offshore Technology in Civil Engineering
Hall of Fame Papers: Volume 11
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE<\p>Offshore Technology...

Optimized Drilled Shaft Design through Post-Grouting: Shorten That Shaft for Better Performance
Tip post-grouting is a technique used to inject, under pressure, a neat cement grout beneath the base of a drilled shaft. This method enhances or improves axial load-displacement performance by increasing...

The Joint Industry Development of a Recommended Practice for the Site Specific Assessment of Mobile Jackup Units
The mobile self-elevating (drilling) unit, or jack-up, has been central to the exploration and development of offshore oil and gas reserves. In recent years there has been an increased...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Offshore Technology in Civil Engineering
Hall of Fame Papers From the Early Years
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

On the Axial Behavior of Drilled Foundations

On the Interpretation of Drilled Foundation Load Test Results

Offshore Jack-Up Drilling Rigs: An Engineering Challenge

Design of Deep Pier Foundations for Expansive Soils

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Seven
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Application of Horizontal Directional Drilling

Sonic Drilling in Support of Geotechnical Investigation and Geo-Construction

You need to Get there Before You Can Drill

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Six
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Constructability Considerations When Designing Drilled Shaft Foundations for Bridges

Special Report: Drilling for a Miracle

Equipment
This chapter examines the types and sizes of equipment required to drill grout holes, proportion and mix grout materials, and deliver and inject grout into the holes in an underground...

Grout Hole Layout
The drilling method, either rotary or percussion, and the type and size of the drills to be used are selected based on such factors as rock type, depth of holes required, working space...

 

 

 

 

Return to search